Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

TF1100-CH – Portable clamp-on ultrasonic liquid flow meter, transit-time

Portable clamp-on ultrasonic liquid flow meter, transit-time

Ultrasonic Flow Meters

Manufacturer part number
DN50-DN6000
Manufacturer
Lanry

Portable transit-time ultrasonic flow meter with clamp-on sensors for non-invasive measurement of liquid flow in full pipes, with bi-directional velocity range of 0.01 to 12 m/s.

Product overview

Lanry TF1100-CH. The TF1100-CH is a portable transit-time ultrasonic flow meter from Lanry, designed to measure the flow of liquids and liquefied gases in fully filled pipes.

Measurement principle. The clamp-on ultrasonic transducers are mounted on the external surface of the pipe, for non-invasive and non-intrusive measurement. The method is based on the ultrasonic transit-time difference correlation principle. Three pairs of transducers cover the most common pipe diameter ranges.

Measuring range. Flow velocity from 0.01 to 12 m/s, bi-directional. Accuracy of ±1.0 % of reading at rates above 0.3 m/s, and ±0.003 m/s of reading below. Repeatability of 0.2 % of reading, resolution of 0.25 mm/s, response time of 0.5 s.

Pipe diameter ranges. 20 to 50 mm for type S, 40 to 1000 mm for type M, 1000 to 6000 mm for type L. Aluminium transducers for the standard temperature sensor and PEEK for the high temperature sensor.

Liquids and temperatures. Clean and somewhat dirty liquids with turbidity below 10000 ppm. Standard liquid temperature from -35 °C to 85 °C, up to 120 °C for short periods.

Interfaces and display. 4-line × 16-character backlit graphic LCD. RS-232 output and logged data. Totalised volume in gallons, ft³, barrels, lbs, liters, m³ and kg, with user-configured English or metric units.

Power and environment. AC supply 85 to 265 V, up to 14 hours of operation on fully charged rechargeable internal batteries. Degree of protection IP65 according to EN 60529. Operating temperature from -20 °C to +60 °C, minimum -30 °C.

Use. Handheld portable unit suited to service and maintenance, control of installed meters, flow rate calibration and data comparison. It can also be used for the temporary replacement of a permanently installed meter. ABS housing, weight 0.5 kg, dimensions 212 x 100 x 36 mm.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Ultrasonic Flow Meters
Request a quote