RS485
Ultrasonic water meter with RS485 output and direct reading

- Coupling screw B (inch) — R1/2 — R3/4 — R1 — R1 1/4
- R1 1/2
- Meter screw A (inch) — G 3/4B — G 1B — G1 1/4B — G1 1/2B
- G 2B
Ultrasonic water meter with RS485 output and direct reading
Direct reading ultrasonic water meter for measuring, storing and displaying water flow in tap-water pipe networks. It offers an RS485 output and wired and wireless M-Bus communication.
Lanry ultrasonic water meter, an ultrasonic water meter for tap-water pipe networks that measures, stores and displays water flow. The model provides direct reading with no moving parts for stable measurement over time. Overview — Direct reading meter for the tap-water pipe network, with an application range for tap-water distribution systems and a nominal diameter of DN15 to DN40. It complies with drinkable water standard requirements and has a shelf life above 10 years. Main characteristics — Low starting flow rate, with a minimum flow rate one third that of a traditional water meter. It detects water temperature and raises a low temperature alarm. It has no moving parts and no wear, and can be installed at any angle without affecting measurement accuracy. Ultrasonic signal quality detection is included. Interfaces and connectivity — The meter supports optical, RS485, and wired and wireless M-Bus communication interfaces. It complies with the MODBUS RTU communication protocol and the EN 13757 standard, allowing integration into a remote reading system. Power and environment — The photosensitive button and IP 68 design allow long-term operation under water. Typical uses — Remote reading of water consumption in tap-water distribution networks, using the RS485 output compatible with MODBUS RTU and M-Bus. Connections — Coupling screw B in inches R1/2, R3/4, R1, R1 1/4 and R1 1/2, and meter screw A in inches G 3/4B, G 1B, G1 1/4B, G1 1/2B and G 2B.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for RS485, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Coupling screw B (inch) — R1/2 — R3/4 — R1 — R1 1/4 | R1 1/2 |
| Meter screw A (inch) — G 3/4B — G 1B — G1 1/4B — G1 1/2B | G 2B |
| Next | DN80 3.6V battery powered two-channel ultrasonic water meter with MBUS MODBUS communication smart water meter |
| Previous | DN15-25 More Accurate M-Bus RS485 Digital And Smart Ultrasonic Water Meter With AMR Software |
No specification matches.
Last verification : 2026-11-03
Official documents and the technical data recorded for RS485. For a missing document or a specific revision, our experts send it to you.
Direct reading ultrasonic water meter for measuring, storing and displaying water flow in tap-water pipe networks. It offers an RS485 output and wired and wireless M-Bus communication.
| Parameter | Value |
|---|---|
| Coupling screw B (inch) — R1/2 — R3/4 — R1 — R1 1/4 | R1 1/2 |
| Meter screw A (inch) — G 3/4B — G 1B — G1 1/4B — G1 1/2B | G 2B |
| Next | DN80 3.6V battery powered two-channel ultrasonic water meter with MBUS MODBUS communication smart water meter |
| Previous | DN15-25 More Accurate M-Bus RS485 Digital And Smart Ultrasonic Water Meter With AMR Software |
Answers to the questions that the recorded characteristics of RS485 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Previous": DN15-25 More Accurate M-Bus RS485 Digital And Smart Ultrasonic Water Meter With AMR Software.
Yes — recorded under "Next": DN80 3.6V battery powered two-channel ultrasonic water meter with MBUS MODBUS communication smart water meter.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Ultrasonic water meter with RS485 output and direct reading

ultrasonic water meter inline type

100% Original Gas Meter Data Logger - HAC-ML LoRa Low Power Consumption wireless AMR system

100% Original LoRa counter - Pulse reader for Elster gas meter

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | RS485 |
| Manufacturer | Lanry |
Gas and Water Smart Meters
Gas Meter Pulse Reader Module with NB-IoT, LoRaWAN and LTE Cat.1 · Ref. : RETROFIT-YOUR-GAS-METER-WITH-WR-G-SMART-PULSE-READER-NB-IOT-LORAWAN-LTE
Price on request
Gas and Water Smart Meters
Volumetric dry type water meter with remote cable, MID approved · Ref. : PD-SDC-E
Price on request
Gas and Water Smart Meters
Smart ultrasonic water flow meter with direct reading
Price on request
Gas and Water Smart Meters
Ultrasonic gas flow transducer 200 kHz · Ref. : HT0013
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details