86CM45
NEMA 34 two-phase stepper motor 4.5 N.m holding torque

- Phase Current (A)
- 6.0
- Characteristics
- Standard
- Holding Torque (N.m)
- 4.5
- Inductance (mH)
- 2.95
NEMA 34 two-phase stepper motor 4.5 N.m holding torque
The Leadshine 86CM45 is a two-phase NEMA 34 stepper motor for industrial motion control applications, with a holding torque of 4.5 N.m.
Leadshine 86CM45 stepper motor. The 86CM45 is a two-phase hybrid stepper motor in the NEMA 34 frame size from Leadshine's CM series, designed to move an attached load with high precision.
Main characteristics. Holding torque of 4.5 N.m, phase current of 6.0 A, phase resistance of 0.43 ohm, inductance of 2.95 mH and inertia of 1.4 kg/cm2. The motor is rated standard, has an IP40 protection rating and weighs 2.4 kg.
Shaft and construction. The shaft diameter is 12.7 mm. Bearings and shaft are made by Japanese manufacturers, for high precision, low motor heating and low vibration.
Typical uses. This motor suits industrial motion control applications, paired with a compatible Leadshine stepper drive, for example the DM2282 or EM882S drives cited in the manufacturer documentation.
Integration. The motor is driven by a two-phase stepper drive; the electrical characteristics above allow sizing of the power supply and wiring. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for 86CM45, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Characteristics | Standard |
| Holding Torque (N.m) | 4.5 |
| Inductance (mH) | 2.95 |
| Inertia (kg/cm2) | 1.4 |
| IP Rate | IP40 |
| Phase Current (A) | 6.0 |
| Resistance (ohm) | 0.43 |
| Shaft Diameter (mm) | 12.7 |
| Weight (kg) | 2.4 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for 86CM45. For a missing document or a specific revision, our experts send it to you.
The Leadshine 86CM45 is a two-phase NEMA 34 stepper motor for industrial motion control applications, with a holding torque of 4.5 N.m.
| Parameter | Value |
|---|---|
| Characteristics | Standard |
| Holding Torque (N.m) | 4.5 |
| Inductance (mH) | 2.95 |
| Inertia (kg/cm2) | 1.4 |
| IP Rate | IP40 |
| Phase Current (A) | 6.0 |
| Resistance (ohm) | 0.43 |
| Shaft Diameter (mm) | 12.7 |
| Weight (kg) | 2.4 |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
NEMA 34 two-phase stepper motor 4.5 N.m holding torque




Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | 86CM45 |
| Manufacturer | Leadshine |
Stepper Motors
Closed loop NEMA 23 stepper motor with 1000-line encoder · Ref. : CS-M22313
Price on request
Stepper Motors
2-phase hybrid stepper motor NEMA 23, 4 A
Price on request
Stepper Motors
2-phase NEMA 34 hybrid stepper motor, 8.5 N.m
Price on request
Stepper Motors
Two-phase NEMA 34 hybrid stepper motor
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details