D57CM31
NEMA 23 2-phase stepper motor 3.1 N.m holding torque

- Phase Current (A)
- 5.0
- Center Diameter (mm)
- 38.1
- Characteristics
- Standard
- Holding Torque (N.m)
- 3.1
NEMA 23 2-phase stepper motor 3.1 N.m holding torque
The D57CM31 is a Leadshine NEMA 23 2-phase stepper motor with 3.1 N.m holding torque, intended for industrial motion control applications.
Overview. The Leadshine D57CM31 is a hybrid stepper motor from the CM series, in NEMA 23 frame size with 2 phases, for industrial motion control applications.
Main characteristics. It provides a holding torque of 3.1 N.m, a phase current of 5.0 A, a resistance of 0.4 ohm, an inductance of 1.8 mH and a center diameter of 38.1 mm. Its inertia is 0.84 kg/cm2 and its weight is 1.4 kg.
Construction and protection. It is built with bearings and a shaft made by Japanese manufacturers, allowing the attached load to be moved with high precision, low motor heating and low vibration. Its IP rate is IP40 and its characteristics are standard.
Use. Combined with a compatible Leadshine drive, this motor can be integrated into motion control systems where precision and limited heating are required. The EM2RS-870 (Modbus RTU protocol over RS485) and EM3E-870E (EtherCAT) drives are among the manufacturer's related products.
Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for D57CM31, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Center Diameter (mm) | 38.1 |
| Characteristics | Standard |
| Holding Torque (N.m) | 3.1 |
| Inductance (mH) | 1.8 |
| Inertia (kg/cm2) | 0.84 |
| IP Rate | IP40 |
| Phase Current (A) | 5.0 |
| Resistance (ohm) | 0.4 |
| Weight (kg) | 1.4 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for D57CM31. For a missing document or a specific revision, our experts send it to you.
The D57CM31 is a Leadshine NEMA 23 2-phase stepper motor with 3.1 N.m holding torque, intended for industrial motion control applications.
| Parameter | Value |
|---|---|
| Center Diameter (mm) | 38.1 |
| Characteristics | Standard |
| Holding Torque (N.m) | 3.1 |
| Inductance (mH) | 1.8 |
| Inertia (kg/cm2) | 0.84 |
| IP Rate | IP40 |
| Phase Current (A) | 5.0 |
| Resistance (ohm) | 0.4 |
| Weight (kg) | 1.4 |
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
NEMA 23 2-phase stepper motor 3.1 N.m holding torque




Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | D57CM31 |
| Manufacturer | Leadshine |
Stepper Motors
Closed loop NEMA 23 stepper motor with 1000-line encoder · Ref. : CS-M22313
Price on request
Stepper Motors
2-phase hybrid stepper motor NEMA 23, 4 A
Price on request
Stepper Motors
2-phase NEMA 34 hybrid stepper motor, 8.5 N.m
Price on request
Stepper Motors
Two-phase NEMA 34 hybrid stepper motor
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details