Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

K162 – Waterproof Wi-Fi 6 and Zigbee/Thread IoT Development Kit

Waterproof Wi-Fi 6 and Zigbee/Thread IoT Development Kit

Microcontroller Development Boards

Manufacturer part number
K162
Manufacturer
M5Stack

M5Stack ToughC5 waterproof IoT controller built on the ESP32-C5HR8 module, with a 2.0-inch LCD touch screen and multi-protocol connectivity for outdoor edge data collection and gateway use.

Product overview

Overview. The M5Stack ToughC5 (K162) is an outdoor waterproof IoT development kit built around the ESP32-C5HR8 core module, featuring a RISC-V 32-bit single-core processor running at 240 MHz, with 16 MB Flash and 8 MB Octal PSRAM.

Wireless connectivity. The module provides 2.4 and 5 GHz dual-band Wi-Fi 6, BLE 5 and IEEE 802.15.4 with Zigbee and Thread support. The 2.4 and 5 GHz FPC antenna connects through an IPEX 2nd Gen connector with a 50 mm cable.

Human-machine interface. The 2.0-inch IPS LCD displays 320 x 240 pixels with a maximum brightness of 853 nit and a capacitive touch panel driven by the CHSC6540 IC. An onboard passive buzzer completes the interaction.

Interfaces and expansion. The USB Type-C port is used for debugging and program download. Four HY2.0-4P connectors (RS485, I2C, GPIO, UART) are available internally and routed externally through two M12 cable routing holes. An RS485 converter based on SP485EEN-L/TR is integrated. A microSD card slot is provided.

Power and energy management. The kit accepts USB at DC 5 V 500 mA, RS485 interface input power at DC 6 to 24 V 1 A, or a DC 3.7 V battery. Power management relies on the M5PM1 and M5IOE1, with low-power wake-up support. The RX8130CE real-time clock is powered by a DC 3 V 220 mAh battery.

Housing and environment. The PC + ABS housing with UV powder resists UV aging. It provides standard water and dust resistance and is not designed for immersion. The product weighs 119.0 g.

Typical uses. The kit suits outdoor edge data collection, smart building automation, outdoor industrial field control and environmental monitoring gateways.

Integration. Modbus support is not stated in the data; communication with PLCs can use the RS485 port and the UART interface available on the HY2.0-4P connectors.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote