Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

MaUWB_DSTO – UWB DSTO direct module with battery and USB interface

UWB DSTO direct module with battery and USB interface

BMS Boards

  • Ultra-wideband (UWB)
Manufacturer part number
MADSDR
Manufacturer
Makerfabs

Makerfabs UWB DSTO module for distributed mesh ranging between nodes, used to monitor distances between nodes, for example for anti-collision.

Product overview

Overview. The Makerfabs MaUWB_DSTO Direct is a UWB DSTO (Distributed Synchronization and Two-way Observation) node based on the MaUWB_DSTO chipset, with a UART to USB interface and battery management, to quickly configure a UWB DSTO system and check its monitoring results.

Main characteristics. The module operates on the CH9 band at 8987.2 MHz, with a range of up to 200 m in open and visible space, an accuracy of 10 cm and a refresh rate of 500 Hz. Each node discovers and connects to the other nodes autonomously; with the default firmware, the system can include up to 20 nodes.

Interfaces and connectivity. UART to USB conversion is provided by a CH340. The module has a 200 mAh battery with an onboard charger via USB Type-C.

Power and environment. The integrated 200 mAh battery and onboard charger are designed for operation between -20 °C and 60 °C. The module measures 9.4 mm × 3.3 mm × 0.9 mm.

Typical uses. Real-time distance measurement network between nodes, for example for anti-collision. If some nodes are fixed, the distances between fixed nodes and the mobile node also allow positioning of the mobile node.

Integration. Makerfabs provides a DSTO assistant tool for system setup and result checking.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All BMS Boards
Request a quote