MCC8285ES
802.11b/g/n Wi-Fi module with ESP8285, UART and GPIO

802.11b/g/n Wi-Fi module with ESP8285, UART and GPIO
802.11b/g/n Wi-Fi module in DIP-18 package built around the ESP8285 SoC, intended for embedded wireless connectivity and remote control through UART, GPIO, PWM and ADC.
Overview. The Makerfabs ESP-01M is an 802.11b/g/n Wi-Fi module in an 18 x 18 x 2.8 mm DIP-18 package, built around the ESP8285 low-power 32-bit CPU, which can also serve as the application processor.
Main characteristics. The module includes 1 MByte of built-in SPI Flash, a 2 dBi PCB antenna and 11 IO ports. The frequency range is 2412 to 2484 MHz. It supports STA, AP and STA+AP operation modes, Smart Config and AirKiss, and WEP, WPA-PSK and WPA2-PSK security. Firmware can be upgraded remotely (FOTA) and the module supports secondary development.
Interfaces and connectivity. The module provides UART, GPIO, PWM and ADC interfaces. UART baudrate ranges from 300 to 4608000 bps, with a default of 115200 bps. General AT commands can be used quickly, and the embedded lwIP protocol stack is included.
Power and environment. The power supply is 3.0 V to 3.6 V with a current above 300 mA. Typical consumption is about 71 mA in continuous transmission, 300 mA peak, about 20 mA in modem sleep, about 2 mA in light sleep and about 0.02 mA in deep sleep. The operating temperature range is -20 to 85 °C, and the storage environment is -40 to 90 °C, below 90 % RH.
Typical uses. The module suits home automation, industrial wireless control, baby monitors, wearable electronic products and wireless positioning systems, as described by the manufacturer for networking applications.
Integration. The module is supplied alone in its package. It is available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for MCC8285ES. For a missing document or a specific revision, our experts send it to you.
802.11b/g/n Wi-Fi module in DIP-18 package built around the ESP8285 SoC, intended for embedded wireless connectivity and remote control through UART, GPIO, PWM and ADC.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
802.11b/g/n Wi-Fi module with ESP8285, UART and GPIO

WiFi Espressif ESP32

WiFi and BLE Espressif ESP32-WROVER — RAK11200 WiFi and BLE Espressf ESP32-WROVER with Arduino Open Source

WiFi and BLE Espressif ESP32-WROVER — RAK11200 WiFi and BLE Espressf ESP32-WROVER with Voice Processing

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | MCC8285ES |
| Manufacturer | Makerfabs |
Wi-Fi and Bluetooth Modules
Wi-Fi and Bluetooth LE module with PCB antenna · Ref. : ESP32-S3-WROOM-1-N4R2
Price on request
Wi-Fi and Bluetooth Modules
M.2 2230 Wi-Fi 6 and Bluetooth 5.3 Card · Ref. : AP12275-M2
Price on request
Wi-Fi and Bluetooth Modules
802.11b/g/n Wi-Fi and Bluetooth SoC Module · Ref. : MCC32SESP
Price on request
Wi-Fi and Bluetooth Modules
Wi-Fi and NFC module with ARM Cortex-M3 microcontroller · Ref. : DFR0477
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details