Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

LM2596S – Adjustable DC-DC step-down module 3A with voltmeter

Adjustable DC-DC step-down module 3A with voltmeter

Non-Isolated DC/DC Converters

Manufacturer part number
MPA12596S
Manufacturer
Makerfabs

Non-isolated DC-DC converter module with adjustable output voltage from 1.25 V to 35 V, delivering up to 3 A, with a built-in voltmeter to monitor input or output voltage.

Product overview

Overview. Makerfabs offers the LM2596S DC-DC converter module, reference MPA12596S, a non-isolated module with an adjustable output voltage from 1.25 V to 35 V. It delivers an output current of 3 A.

Main characteristics. The input voltage ranges from 2.5 V to 36 V and must be at least 1.5 V higher than the output voltage. The module measures 66 mm x 35 mm x 14 mm.

Built-in voltmeter. The module includes a voltmeter with a measurement accuracy of ±0.1 V. A button switches the measurement between input and output voltage, and two LEDs (IN and OUT) indicate which voltage is displayed. The voltmeter does not work if the input voltage is below 4 V. It can be switched off by a long press on the button.

Calibration. The module can be calibrated manually using a stable and accurate power supply. The correction, between -0.5 V and +0.5 V, is stored in non-volatile memory for the input and then the output voltage.

Typical uses. This module suits powering boards and loads that require an adjustable voltage from a DC source, with visual monitoring of the voltages.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote