MTE21RO – 2.1 inch 480×480 IPS touch display with rotary encoder

2.1 inch 480×480 IPS touch display with rotary encoder

USB Wireless Adapters

  • Wi-Fi
  • Bluetooth
Manufacturer part number
MTE21RO
Manufacturer
Makerfabs

IPS 2.1 inch 480×480 capacitive touch display module with a rotary encoder and an ESP32-S3 controller with Wi-Fi and Bluetooth 5.0, for user interfaces in IoT projects.

Product overview

Overview. The MTE21RO from Makerfabs is a 2.1 inch IPS touch display module with a 480×480 resolution, based on the ESP32-S3R8 microcontroller with Wi-Fi and Bluetooth 5.0.

Main characteristics. The high brightness IPS panel shows 65K colours with a refresh rate above 70 FPS. The panel is driven by an ST7701S controller over an RGB 565 interface, and the 5-point capacitive touch panel uses a CST8266 driver. The module carries 8 MB of PSRAM and 16 MB of flash. A rotary encoder supports clockwise and anticlockwise rotation as well as pressing to confirm an operation.

Interfaces and connectivity. The module connects to networks over Wi-Fi and Bluetooth 5.0. It is powered and programmed directly through its native USB Type-C connector. It provides one I2C interface and one UART interface, both on 1.25 mm 4-pin connectors. Arduino support is available.

Power and environment. The module operates over a temperature range of -40 °C to +85 °C.

Typical uses. This module suits human-machine interfaces for connected equipment, such as local control, setting or monitoring screens operated by the encoder and touch panel.

Integration. The module is compatible with LVGL and the SquareLine environment for rapid graphical interface development.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All USB Wireless Adapters
Request a quote