OSP213DSO
4-Channel Handheld Digital Oscilloscope, 100 MSa/s

- Sample Memory Depth
- 4 channels, 4*4K
- Storage
- built in 8M USB disk
- Analog Channels
- 2([CH_A] [CH_B])
- Digital Channels
- 2([CH_C] [CH_D])
4-Channel Handheld Digital Oscilloscope, 100 MSa/s
Makerfabs DS213 handheld digital oscilloscope with 2 analog and 2 digital channels and a 100 MSa/s sampling rate, for signal measurement and analysis in general electronics.
Makerfabs DS213 handheld digital oscilloscope — The Makerfabs DS213 digital oscilloscope is a four-channel handheld measuring instrument based on an ARM Cortex M3 core, whose application layer is open source.
Main characteristics. Two analog channels [CH_A] and [CH_B] and two digital channels [CH_C] and [CH_D], a 100 MSa/s sampling rate in real-time sampling mode, 8-bit vertical resolution and a 4 × 4K sample memory depth. Vertical sensitivity ranges from 10 mV to 10 V per division with an X1 probe and from 100 mV to 100 V per division with an X10 probe.
Measurement and analysis functions. Automatic measurements of signal sequence, cycle, duty ratio, peak voltage, virtual value, and maximum, minimum and average values. Time and amplitude cursor measurements. Channel operations include inversion, addition and subtraction of [CH_A] and [CH_B], and logic combinations of [CH_C] and [CH_D].
Triggering. Auto, Normal, Single and Slow trigger modes, with ascending or descending edge triggering, positive or negative pulse triggering, and logic triggering.
Built-in signal source. Square wave from 10 Hz to 8 MHz and sine, triangle and sawtooth waves from 10 Hz to 20 MHz, delivered at 3 Vpp.
Connectivity and storage. Built-in 8 MB USB disk storage for saving waveforms in BMP, BUF and CSV file formats.
Power and size. 1000 mAh battery. Dimensions 99.5 mm × 58.5 mm × 13.5 mm. CE and FCC certified.
Typical uses. Measurement, recording and analysis of signals in general electronics, in the workshop or in the field, thanks to its handheld format.
Integration. The oscilloscope application source code is open, and users can develop their own firmware. Firmware can be loaded and upgraded across four separate application partitions.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for OSP213DSO, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Analog-to-digital converter | HWD9288-100 |
| Analog Channels | 2([CH_A] [CH_B]) |
| Auto Measurement Types | Signal sequence/cycle/duty ratio, peak voltage/virtual value/max value/min value/average |
| Battery | 1000mAh |
| Certificate | CE, FCC |
| Coupling | DC, AC |
| CPU | ARM Cortex M3 |
| Cursor Measurement | Time value, Amplitude value |
| Digital Channels | 2([CH_C] [CH_D]) |
| FIFO & Control | FPGA |
| File Types | BMP、BUF、CSV |
| Max. input voltage | ±40Vpp (using X1 probe) ±400Vpp (using X10 probe) |
| Operation Channel | INV [CH_A], INV [CH_B], [CH_A]+[CH_B]、 [CH_A]-[CH_B]、[CH_C]&[CH_D]、[CH_C] | [CH_D] |
| Sample Memory Depth | 4 channels, 4*4K |
| Sampling Mode | Real-time Sampling |
| Sampling Rate | 100M Sa/s |
| Signal Source | Square Wave: 10Hz to 8MHz, in total 20 shifts and 3 Vpp Signal Sources; |
| Sine/Triangle/Sawtooth Wave | 10Hz to 20MHz, in total 11 shifts and 3 Vpp Signal Sources |
| Size | 99.5mmx58.5mmx13.5mm |
| Storage | built in 8M USB disk |
| Trigger Mode | Auto, Normal, Single, Slow |
| Trigger Source | [CH_A] [CH_B] [CH_C] [CH_D] |
| Trigger Types | Ascend/Descend Edge Trigger Mode, Positive/Negative Pulse Trigger, Logic Trigger |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity | 10mV-10V/div (1-2-5 STEP) (using X1 probe) 100mV-100V/div (1-2-5 STEP) (using X10 probe) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for OSP213DSO. For a missing document or a specific revision, our experts send it to you.
Makerfabs DS213 handheld digital oscilloscope with 2 analog and 2 digital channels and a 100 MSa/s sampling rate, for signal measurement and analysis in general electronics.
| Parameter | Value |
|---|---|
| Analog-to-digital converter | HWD9288-100 |
| Analog Channels | 2([CH_A] [CH_B]) |
| Auto Measurement Types | Signal sequence/cycle/duty ratio, peak voltage/virtual value/max value/min value/average |
| Battery | 1000mAh |
| Certificate | CE, FCC |
| Coupling | DC, AC |
| CPU | ARM Cortex M3 |
| Cursor Measurement | Time value, Amplitude value |
| Digital Channels | 2([CH_C] [CH_D]) |
| FIFO & Control | FPGA |
| File Types | BMP、BUF、CSV |
| Max. input voltage | ±40Vpp (using X1 probe) ±400Vpp (using X10 probe) |
| Operation Channel | INV [CH_A], INV [CH_B], [CH_A]+[CH_B]、 [CH_A]-[CH_B]、[CH_C]&[CH_D]、[CH_C] | [CH_D] |
| Sample Memory Depth | 4 channels, 4*4K |
| Sampling Mode | Real-time Sampling |
| Sampling Rate | 100M Sa/s |
| Signal Source | Square Wave: 10Hz to 8MHz, in total 20 shifts and 3 Vpp Signal Sources; |
| Sine/Triangle/Sawtooth Wave | 10Hz to 20MHz, in total 11 shifts and 3 Vpp Signal Sources |
| Size | 99.5mmx58.5mmx13.5mm |
| Storage | built in 8M USB disk |
| Trigger Mode | Auto, Normal, Single, Slow |
| Trigger Source | [CH_A] [CH_B] [CH_C] [CH_D] |
| Trigger Types | Ascend/Descend Edge Trigger Mode, Positive/Negative Pulse Trigger, Logic Trigger |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity | 10mV-10V/div (1-2-5 STEP) (using X1 probe) 100mV-100V/div (1-2-5 STEP) (using X10 probe) |
Answers to the questions that the recorded characteristics of OSP213DSO can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Storage": built in 8M USB disk.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
4-Channel Handheld Digital Oscilloscope, 100 MSa/s

Miniware 4-Channel Mini Oscilloscope

DSCope U3P100 Dual-Channel 1GSa/s Sampling/100Mhz Bandwidth USB3.0 - Portable Oscilloscope

Digital Storage Oscilloscope with Panels

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | OSP213DSO |
| Manufacturer | Makerfabs |
Handheld Oscilloscopes
100MHz 2GSa/s digital phosphor oscilloscope with 8-inch touch screen · Ref. : UPO2000
Price on request
Handheld Oscilloscopes
Super phosphor digital oscilloscope, 2 or 4 channels · Ref. : SDS1000X-E
Price on request
Handheld Oscilloscopes
500 MHz 4-channel tablet oscilloscope with 14\" touch screen · Ref. : GEN_5_TABLET_OSCILLOSCOPE_ETO_SERIES
Price on request
Handheld Oscilloscopes
20 MHz 1-channel USB pen storage oscilloscope · Ref. : PSO2020
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details