MSL01 – MEMS thermal gas flow sensor

MEMS thermal gas flow sensor

General Industrial Sensors & Transmitters

Manufacturer part number
MEMS_FLOW_SENSOR
Manufacturer
MEMSensing
Wide range ratio > 300
1

The MEMSensing MSL01 is a thermal conduction MEMS flow sensor for measuring gas flow velocity from 0.01 to 10 m/s.

Product overview

Overview. The MEMSensing (Minshen) MSL01 is a MEMS flow sensor based on thermal conduction. It consists of a micro heat source on a sensitive film, symmetrical upstream and downstream temperature sensors and an ambient temperature sensor on a silicon substrate.

Measurement principle. Fluid flow distorts the temperature field around the heater, from which the flow velocity is determined. The gas measurement range is 0.01 to 10 m/s.

Main characteristics. The ambient temperature sensor resistance is typically 3000 Ω at +25°C (minimum 2700 Ω, maximum 3300 Ω). The heater resistance RH is typically 220 Ω (198 Ω to 242 Ω) at +25°C, and its limit current is 15 mA maximum with no airflow at 25°C. The upstream and downstream sensors have a typical resistance of 1600 Ω at +25°C, with a Pt resistor temperature coefficient of 0.230 %/°C (0.218 to 0.253 %/°C) between -40°C and 125°C. The wide range ratio is greater than 300:1.

Typical uses. Gas flow measurement in equipment where low to moderate velocities must be detected accurately.

Integration. The sensor connects through its eight pins, which give separate access to the heater, the upstream and downstream sensors and the ambient temperature sensor. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Wide range ratio > 300: 1

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote