MC083S – 5.8 GHz microwave presence detector for high mounting

5.8 GHz microwave presence detector for high mounting

Electrical CAD Software

  • -25℃…+60℃
  • 150°
  • See detection pattern
  • 100%/75%/50%/10%
Manufacturer part number
MC083S
Manufacturer
Merrytek

The Merrytek MC083S is a built-in 5.8 GHz microwave presence detector for ON/OFF switching of lighting loads mounted up to 12 m high.

Product overview

Overview. The Merrytek MC083S presence detector is a 5.8 GHz microwave sensor (ISM band, 5.8 GHz ±75 MHz) that switches an inductive or resistive load ON and OFF. It is designed for high installation up to 12 m, with a detection angle of 150°.

Detection settings. The hold time is adjustable from 5 s, 30 s, 1 min, 3 min, 20 min and 30 min. The detection area can be set to 100%, 75%, 50% or 10%. A daylight threshold can be selected from 5, 15, 30, 50, 100 and 150 lux, or disabled. High and low sensitivity modes suit metal ceilings and reflective surfaces. The transmitting power is 0.5 mW maximum.

Power and output. The product accepts an input of 108 to 305 V AC, 50/60 Hz, with a rated voltage of 120/277 V AC. Stand-by power is 1 W or less. Load capacity is 2 A at 120 V AC, 3 A at 277 V AC and 3 A at 220-240 V AC. Surge capacity reaches 30 A and 60 A on cold start.

Connection and installation. Push-type terminal blocks accept wires from 0.75 to 1.5 mm². The housing measures 93.5 × 45 × 28.5 mm and weighs 61.2 g, and is built in. Protection is IP20, Class II, for indoor use only.

Environmental conditions. Operating temperature ranges from -25 °C to +60 °C, storage from -40 °C to +80 °C, at 10% to 95% humidity, non-condensing.

Compliance. The MC083S is CE, RED, UL and FCC certified, compliant with EMC standards EN 300 440, EN 301 489-1, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3 and EN 62479, safety standards EN 61058-1 and UL 60703-1, and RoHS compliant.

Installation. The product must be installed by a qualified electrician with power off. A plastic or glass lampshade reduces sensitivity by about 20% for every 3 mm of thickness. Keep metal objects, fans and air outlets away from the sensor.

See all specifications

Highlights

  • Certificate Standards — Certificate: CE, RED,UL,FCC
  • Certificate Standards — Environmental Requirement: Compliant to RoHS
  • Certificate Standards — Safety standards: EN61058-1, UL60703-1
  • Input — Operating Voltage: 108-305V AC 50/60Hz
  • Input Rated Voltage: 120/277V AC 50/60Hz
  • Input — Stand-by Power: ≤1W

Good to know before integrating

  • Thermal: rated operating range -25℃…+60℃ — check it against the installation environment.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote