Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

MS23 Z – 0-10V Daylight Sensor with Zhaga Book 18 Interface

0-10V Daylight Sensor with Zhaga Book 18 Interface

Dimmers and Dimming Modules

Manufacturer part number
MS23
Manufacturer
Merrytek

The Merrytek MS23 Z is a daylight sensor with Zhaga Book 18 interface that automatically adjusts luminaire brightness through a 0-10V DC output. It suits linear high bay, tri-proof and UFO luminaires.

Product overview

Overview. The Merrytek MS23 Z is a daylight sensor listed under dimmers and dimming modules. It operates in 0-10V DC working mode and provides automatic brightness adjustment through daylight harvesting.

Main characteristics. The sensor has a rated input voltage of 12Vdc, an operating voltage range of 11-13Vdc and a working current below 10mA. Its daylight harvesting function offers set points of 200Lux, 300Lux, 400Lux, 500Lux, 600Lux, 700Lux and 800Lux. It provides a 12VDC auxiliary output suitable for powering an LED driver. All brightness parameters are set via the remote control. Factory setting: open at 5Lux, off at 30Lux. Installation height: 2-12m, 15m maximum.

Daylight priority. Several daylight priority pairs are available: 5Lux to 30Lux, 15Lux to 50Lux, 30Lux to 75Lux, 50Lux to 100Lux, 75Lux to 150Lux, 100Lux to 200Lux, 150Lux to 300Lux and 200Lux to 400Lux, as well as an ON/OFF priority mode.

Interfaces and connectivity. The sensor is wired through the Zhaga Book 18 interface, for both input and output, allowing direct integration into compatible luminaires. The 0-10V dimming output is rated below 50mA (non-constant current source).

Power and environment. Operating temperature from -25℃ to +60℃, storage temperature from -40℃ to +80℃, humidity from 10% to 95% non condensing. IP65 rating, protection class 2, net weight 14±3g. CE certified and RoHS compliant.

Typical uses. Lighting control based on natural light in linear, tri-proof and UFO luminaires, installed wall mounted or ceiling mounted.

Integration. The sensor connects to a 0-10V power supply. Refer to the wiring diagram and the size drawing provided by the manufacturer before installation.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote