Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

MSA205 – 24 GHz large-space presence sensor, DALI 2.0

24 GHz large-space presence sensor, DALI 2.0

Occupancy and Presence Sensors

  • DALI
Manufacturer part number
MSA205
Manufacturer
Merrytek

The Merrytek MSA205 is a 24 GHz microwave presence sensor with DALI 2.0 communication, designed for automatic lighting control in large spaces.

Product overview

Overview. The Merrytek MSA205 is a 24 GHz microwave presence sensor with DALI 2.0 communication, designed for large spaces. It detects both large movements, such as walking, and human presence through vital signs such as breathing or finger tapping.

Main characteristics. Detection areas reach 4 to 6 m in diameter for presence, minor motion and movement motion. The sensor works at a rated mounting height of 2.5 to 4.0 m, with a typical height of 3 m, and its 3 dB beam angle is 80° (XZ axis). It measures daylight between 5 and 1200 lux. Sensitivity is set at 100%, 75%, 50% or 25%, and hold time at 5 s, 1 min, 3 min or 5 min using the DIP switches, or at 5 s, 30 s, 1 min, 3 min, 5 min, 10 min, 20 min or 30 min with the MH10 remote. The change from absence to presence is detected within 0.5 s, and the change from presence to absence after more than 30 s. Factory settings are 100% sensitivity and a 1 minute hold time.

Interfaces and connectivity. The MSA205 communicates over a DALI bus in accordance with IEC 62386 commands 101, 103, 303 and 304, and its DALI 2.0 version allows dialogue with other devices on the bus. It is powered from 220-240 V AC, with a rated voltage of 230 V AC and a consumption of 1 W or less. It has 4-hole press terminals.

Power and environment. The sensor operates between 0 °C and +50 °C and can be stored between -40 °C and +80 °C. It complies with EU RoHS and with FCC/RED RF requirements. Its protection rating is IP20, intended for indoor use.

Typical uses. The MSA205 suits automatic lighting control in smart homes, hotels and offices, where one sensor covers one room. Its dimensions of φ105 × 85 mm and embedded mounting through a φ70 to 75 mm cut-out make it straightforward to install in a false ceiling.

Integration. Embedded mounting involves cutting a φ70 to 75 mm hole, connecting the cable to the terminals, then fitting the cover and spring clip. Reading the reference datasheet MSA205-spec-2022.12.13 before installation is recommended. The MSA205 is available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote