Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

MSA236D – PIR motion and daylight sensor with RS485 output

PIR motion and daylight sensor with RS485 output

Occupancy and Presence Sensors

  • RS-485
Manufacturer part number
MSA236D
Manufacturer
Merrytek

The Merrytek MSA236D is a compact PIR motion sensor with daylight detection and RS485 output, designed for ceiling mounting to trigger smart building scenes.

Product overview

Merrytek MSA236D IR 485. PIR motion sensor with daylight detection, RS485 output and ceiling mounting. Overview — This compact presence detector, 58 mm in diameter and 36 mm high, detects human movement in most indoor spaces using a planar Fresnel lens. It can trigger smart scenes in smart home, smart hotel and smart office applications. Main characteristics — Detection range of 8 to 10 m in diameter, typical mounting height of 3 m (range 2.5 to 4 m), detection area adjustable at 100%, 75%, 50% or 25%, hold time adjustable from 10 s to 30 min, daylight sensor reporting from 0 to 1200 lux. After power-up the sensor runs a 10 s self-check during which it does not respond to motion. Factory settings are 100% detection area, 10 s hold time and daylight sensor disabled. Interfaces and connectivity — RS485 output with protocol support, 4-pin terminal connection, dry contact factory set to NO and switchable to NC by remote. Detection area, hold time and ID can be set remotely through the RS485 protocol or by remote control. Daisy-chain wiring is highly recommended, with a maximum RS485 wire length of 300 m and a maximum of 12 sensors per circuit. Shielded 4-pin cable or class 6 network cable is recommended. Power and environment — Input voltage 12-24 V DC, power consumption at most 0.5 W, working current 20 mA max. Working temperature from -25 °C to +50 °C, storage temperature from -40 °C to +80 °C, IP20 rating, compliant with CE and RoHS. Typical uses — Presence detection in hallways and toilets, scene-based lighting control in smart buildings. Integration — The RS485 connection allows integration into a compatible supervision system. If impedance matching is an issue on the bus, the manufacturer recommends two 120 Ω resistors at the terminals. Surface or flush mounting is possible with a Φ45 mm drill hole.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote