The Merrytek MSA237K 99 C is a 24 GHz radar presence sensor with KNX communication, designed for large indoor spaces such as smart buildings, hotels and offices.
Input/Output — Auxiliary Power Supply Voltage Range12-30V DC
Input/Output — Auxiliary Power Supply Working Current12V : 55±3mA Max 24V: 30±3mA Max
Input/Output — KNX Terminal Current3±1mA
Sensor Parameter — Working Frequency24GHz-24.25GHz ISM band
Overview. The Merrytek MSA237K 99 C is a 24 GHz radar presence sensor in KNX version, designed for presence detection in indoor spaces. It relies on a high-gain orthogonal half-wave antenna and on the manufacturer's proprietary software algorithm.
Detection. The sensor detects major, minor and micro movements, including those caused by breathing, using FMCW modulation. It operates in the 24 GHz to 24.25 GHz ISM band with a maximum transmitting power of 5 mW. The radiation pattern is round, and the 3 dB beam angle is 100° in the XZ field.
Range and settings. The 100% detection area has a radius of 3.5 ± 0.5 m for installation at 3 m height, based on a test in a 41 m² open area and subject to change depending on the space. The detection area is adjustable from 0.5 to 4 m and the hold time from 3 s to 7200 s, via ETS or remote control. A hold time above 30 s is recommended for better presence detection. The mounting height is between 2 and 4 m, with a typical value of 3 m. The switch from absence to presence takes less than 0.5 s, and the switch from presence to absence takes at least 15 s.
Connectivity and power. The sensor communicates over the KNX bus, with 4-pin red and black KNX terminals and an auxiliary power supply via 4-pin yellow and white spring terminals. The auxiliary supply voltage range is 12 to 30 V DC, with a working current of 55 ± 3 mA maximum at 12 V and 30 ± 3 mA maximum at 24 V. The KNX bus voltage is 21 to 30 V DC, the KNX terminal current is 3 ± 1 mA, and the working power is at most 1 W at 24 V DC.
Installation and environment. The product is designed for flush mounting in a Φ50 to 55 mm hole and measures Φ63 × 35 mm. It has an IP20 rating, complies with RoHS and FCC/RED requirements, and operates between 0 and +50 °C, with a storage temperature of −40 to 80 °C at humidity up to 85% non-condensing. The manufacturer offers a 3-year guarantee, limited to product quality problems in indoor application.
Typical uses. The sensor suits lighting and HVAC control in smart buildings, hotels and offices, thanks to its reliable presence signal and its two lighting channels and one HVAC channel.
The Merrytek MSA237K 99 C is a 24 GHz radar presence sensor with KNX communication, designed for large indoor spaces such as smart buildings, hotels and offices.
Input/Output — Auxiliary Power Supply Voltage Range12-30V DC
Input/Output — Auxiliary Power Supply Working Current12V : 55±3mA Max 24V: 30±3mA Max
Input/Output — KNX Terminal Current3±1mA
Sensor Parameter — Working Frequency24GHz-24.25GHz ISM band
major/minor/micor movement(3m height installation): 3.5±0.5m(based on 41㎡ open area test and might change due to different space)
Sensor parameter — Detection Area
ETS/remote setting: 0.5-4m
Sensor parameter — Hold Time
ETS/remote setting: 3S-7200S Remark: For better presence detection,hold time shall set >30S
Sensor parameter — Mounting height
2-4m, typical value: 3m
Sensor parameter — Remote control
Support
Sensor Parameter — Transmitting Power
5mW Max
Sensor Parameter — Working Frequency
24GHz-24.25GHz ISM band
Integration
Points to check before using MSA237K in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Powerplan for a supply compatible with 12-30V DC.
Power and communication
Input/Output — Auxiliary Power Supply Voltage Range
12-30V DC
Input/Output — Auxiliary Power Supply Working Current
12V : 55±3mA Max 24V: 30±3mA Max
Input/Output — KNX Terminal Current
3±1mA
Input/Output — KNX Terminal Voltage
21-30V DC
Input/Output — Working Power
≤1W @24V DC
Sensor Parameter — Transmitting Power
5mW Max
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Power : plan for a supply compatible with 12-30V DC.
Applications and use cases
Architectures in which MSA237K can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Meeting rooms are booked but empty, and some areas are always full. Presence sensors, radars and counting cameras measure how spaces are really used, room by room or at entrances
To check
Presence per room or counting at entrances, or both
Privacy requirements, which favour radar or anonymous counting
Hotel rooms keep heating, cooling and lights on while empty. A room control system links thermostats, switches, door contacts and lighting controllers so the room adapts to the guest’s presence
To check
Wired bus or wireless system, depending on renovation or new build
Link with the property management system for check-in and check-out
Behaviour when the guest is absent (setback temperature, lights off)
Associated system blocks
Climate controlSwitches and panelsPresence detectionLighting control
A building’s energy, comfort and occupancy data sit in separate systems. Sensors, meters and gateways feed one model of the building, room by room, to compare scenarios and steer the installations
To check
Data model and building plans available
Software platform hosting the twin
Sensor density needed for a useful model
Associated system blocks
SensorsMetersGateways
Need a complete solution?
Send a request for MSA237K and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productMerrytek
MSA237K
24 GHz KNX radar presence sensor for large indoor spaces
Input/Output — Auxiliary Power Supply Voltage Range
12-30V DC
Input/Output — Auxiliary Power Supply Working Current
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details