EG71 – Building IoT Gateway, Wired and Wireless LoRaWAN

Building IoT Gateway, Wired and Wireless LoRaWAN

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • Auto MDI/MDIX
  • 50mA / 30UL
  • >=1000Hz
  • 1 × Micro SD Slot
Manufacturer part number
EG71
Manufacturer
Milesight IoT
Interface
Auto MDI/MDIX
Maximum Current Load
50mA / 30UL

The Milesight EG71 building IoT gateway combines wired and wireless protocols (Modbus, BACnet, KNX, I/O and LoRaWAN) in a single device for smart building integration.

Product overview

Overview. The Milesight EG71 is a building IoT gateway that brings Modbus, BACnet, KNX, I/O and LoRaWAN together in one device, aggregating data and converting protocols for the integration of new and retrofit buildings.

Data acquisition. It reads Modbus RTU and BACnet MS/TP over RS485, KNX/TP, and BACnet/IP, Modbus TCP and Modbus RTU over TCP over Ethernet or Wi-Fi. The KNX bus is powered at 21-30 V DC. Analog inputs accept 0-10V or 4-20mA at 12bit with ±1% FS accuracy, and RS485 runs from 1200 to 115200 bps on shielded twisted pair up to 350 m.

Data forwarding. Data is forwarded over MQTT(s), HTTP(s), BACnet/IP, Modbus TCP or Modbus RTU over TCP, allowing polling by a BMS or SCADA system.

LoRaWAN. The gateway supports the CN470, IN865, EU868, RU864, US915, AU915, KR920 and AS923-1&2&3&4 frequency plans, with Noise Analyzer, Gateway Fleet, Multicast and FUOTA, and a 50 Ω SMB antenna connector. An L08GL cellular version is offered.

Development. Python SDK, Node-RED and Docker are supported. The unit measures 123 x 90 x 36 mm.

See all specifications

Highlights

  • Dimensions: 123 x 90 x 36 mm (4.84 x 3.54 x 1.42 in)
  • Frequency band: CN470/IN865/EU868/RU864/US915/AU915/KR920/AS923-1&2&3&4
  • Accuracy: ±1% FS
  • Advanced Features: Noise Analyzer, Gateway Fleet, Multicast, FUOTA
  • Analog Type: 4-20mA or 0-10V (Software Switchable)
  • Antenna: 1 × 50 Ω SMB - Female External Connecto

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40°C to +60°C (-40°F to +140°F) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote