The UC100 is a Modbus RTU RS485 to LoRaWAN converter from Milesight IoT. It collects data from on-site Modbus devices and transmits it over LoRaWAN, with autonomous operation.
Operating Temperature-20°C ~ 60°C (-4°F~140°F)
Power consumption< 0.5 W
Baud rate1200~115200 bps
ConfigurationUSB Type-C or Downlink
Connector2-pin 3.5 mm Terminal Block
Ingress ProtectionIP30
Product overview
UC100. Milesight IoT UC100 is a Modbus RS485 to LoRaWAN converter, an IoT controller designed for data collection and remote control of Modbus RTU devices. — Main features — It reads up to 64 Modbus registers, supports Modbus transparent transmission, and can read up to 32 Modbus RTU devices. It offers 16 IF-THEN commands, threshold and change alarms, and data storage of up to 800 entries with retrievability and retransmission. — Connectivity and interfaces — The RS485 port and 2-pin 3.5 mm terminal block connect field sensors and devices. Configuration is possible locally via USB Type-C or remotely via LoRa downlink. The internal or external antenna through a 50 Ω SMA connector, together with the switchable 120 Ω terminal resistor, complete the installation. The Milesight D2D protocol enables communication between Milesight nodes without a LoRaWAN gateway, and FUOTA firmware updates are supported. — Power and environment — Power supply from DC 5 to 24 V or via USB Type-C at DC 5 V/1 A, power consumption below 0.5 W. Operating temperature from -20 °C to 60 °C, relative humidity 0% to 95% non-condensing, IP30 ingress protection. Dimensions 70 × 45 × 13 mm, weight 32 g. — Typical uses — Collecting data from Modbus RS485 sensors and forwarding it to a LoRaWAN network, remote control and local automation when the network is unavailable. Compatible with standard LoRaWAN gateways and network servers.
The UC100 is a Modbus RTU RS485 to LoRaWAN converter from Milesight IoT. It collects data from on-site Modbus devices and transmits it over LoRaWAN, with autonomous operation.
compliant with standard LoRaWAN® gateways and network servers
Ingress Protection
IP30
Installation
Desktop, Wall Screw Mounting
LED Indicator
1 × System
Material & Color
PC+ABS, White
Mode
OTAA/ABP Class C
Operating Temperature
-20°C ~ 60°C (-4°F~140°F)
Penetrating Signals
data transmission range up to 2 km in urban areas and 15 km in rural areas
Port
1 × RS485
Power Connector
1 × 3.5mm 2-pin Terminal Block, with Surge-Protection and Reverse; Polarity Protection
Power consumption
< 0.5 W
Power supply
1. DC 5-24 V by Power Connector; 2. DC 5V/1A by Type-C Port
Protocol
Modbus RTU, Passthrough
Relative humidity
0% ~ 95% (non-condensing)
Reset Button
1 × Reset Button (Internal)
Sensitivity
-137dBm @300bps
Technology
LoRaWAN®, Milesight D2D
Terminal Resistor
1 × 120 Ω Resister Switch
Tx Power
16dBm (868 MHz)/22dBm (915 MHz)/19dBm (470 MHz)
USB
1 × Type-C for Power Supply, Configuration and Console
Weight
32g
Integration
Points to check before using UC100 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Thermalrated operating range -20°C ~ 60°C (-4°F~140°F) — check it against the installation environment.
Power and communication
Power Connector
1 × 3.5mm 2-pin Terminal Block, with Surge-Protection and Reverse; Polarity Protection
Power consumption
< 0.5 W
Power supply
1. DC 5-24 V by Power Connector; 2. DC 5V/1A by Type-C Port
Tx Power
16dBm (868 MHz)/22dBm (915 MHz)/19dBm (470 MHz)
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Thermal : rated operating range -20°C ~ 60°C (-4°F~140°F) — check it against the installation environment.
Applications and use cases
Architectures in which UC100 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Milesight sensors, LoRaWAN gateways and cellular routers can be brought together on the Milesight Development Platform, which manages the devices and passes their data to other applications through an API and webhooks
To check
Development Platform for device management, API and webhooks, or another network server and application
Devices provisioned through Milesight RPS must have that provisioning removed before being added to the Development Platform
Data flows to the customer’s own application through webhooks
Associated system blocks
SensorsGateways and routers
Need a complete solution?
Send a request for UC100 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productMilesight IoT
UC100
Modbus RS485 to LoRaWAN converter with IoT controller
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details