Milesight UG56 industrial 8-channel half-duplex LoRaWAN gateway for collecting LoRaWAN sensor data, with an embedded network server and 4G LTE backhaul.
Operating Temperature-20°C to +60°C (-4℉ to +140℉)
InterfaceAuto MDI/MDIX
Power consumptionTypical 1.8 W, Max 6.9 W
Extendable Storage1 × Micro SD Slot (Internal)
Flash8 GB eMMC
Memory512 MB DDR3 RAM
Product overview
Overview. The Milesight UG56 is an industrial 8-channel half-duplex LoRaWAN gateway with an embedded network server and several backhaul options.
Main characteristics. It runs on a quad-core 1.3 GHz 64-bit ARM Cortex-A35 processor with 512 MB DDR3 RAM and 8 GB eMMC storage. It supports Listen Before Talk and Gateway Fleet to act as network server for other Milesight gateways. Frequency plans available are CN470, IN865, EU868, RU864, US915, AU915, KR920 and AS923-1&2&3&4. Sensitivity is -140 dBm @292bps and maximum Tx power is 27 dBm. The gateway includes the Milesight devices codec library, FUOTA upgrades of end devices and data retransmission after network recovery.
Interfaces and connectivity. One 10/100 Mbps RJ45 Ethernet port with 1.5 kV RMS isolation, a Mini SIM-2FF slot for 4G LTE and a USB Type-C port for power and console. Integration protocols include MQTT(s), HTTP(s), BACnet/IP, BACnet/SC, Modbus TCP and Modbus RTU over TCP. The gateway also supports OpenVPN, IPsec, PPTP, L2TP, GRE, DMVPN and WireGuard VPN, firewall, DDNS and WAN Failover.
Power and environment. Powered by 802.3af PoE (PD) or 5V/2A via the Type-C port. Typical consumption 1.8 W, maximum 6.9 W. Operating temperature from -20°C to +60°C, IP30 ingress protection, internal antenna and 50 Ω SMA connector.
Typical uses. Collecting data from Class A, B and C LoRaWAN sensors into information systems over MQTT or HTTP, or integrating with PLCs and supervision equipment over Modbus TCP or BACnet/IP. Around 2000 Class A/B/C devices can be supported at a 10-minute uplink interval.
Installation. Desktop, wall or DIN rail mounting. Dimensions 110 x 75 x 24 mm, weight 186 g.
Milesight UG56 industrial 8-channel half-duplex LoRaWAN gateway for collecting LoRaWAN sensor data, with an embedded network server and 4G LTE backhaul.
Operating Temperature-20°C to +60°C (-4℉ to +140℉)
Around 2000 Class A/B/C Devices (10 min uplink interval)
Tx Power
27 dBm Max
Update
Web, Milesight Development Platform, DeviceHub
USB
1 × USB Type-C for Power Supply and Console
VPN Tunnel
OpenVPN/IPsec/PPTP/L2TP/GRE/DMVPN/WireGuard
Weight
186g
Integration
Points to check before using UG56 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Thermalrated operating range -20°C to +60°C (-4℉ to +140℉) — check it against the installation environment.
Power and communication
Power consumption
Typical 1.8 W, Max 6.9 W
Power Input
1. 802.3 af PoE; 2. 5V/2A by Type-C Port
Tx Power
27 dBm Max
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Thermal : rated operating range -20°C to +60°C (-4℉ to +140℉) — check it against the installation environment.
Applications and use cases
Architectures in which UG56 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Energy bills give one total for the whole site. Submetering places meters and current sensors on each circuit or usage and collects their readings through a gateway, so consumption can be followed per building, floor or machine
To check
Number of circuits and phases to meter, and the current range of each
Wired Modbus bus or wireless LoRaWAN, depending on cabling access in the switchboards
Accuracy class required for internal allocation or for billing
Offices and classrooms get stuffy without anyone measuring why. Indoor air quality monitoring places CO2, VOC and particle sensors in the rooms and reports their values through a gateway, so ventilation can be adjusted to real occupancy
To check
Parameters to measure (CO2 alone or CO2, VOC and particles)
Battery-powered sensors or mains-powered sensors with display
Integration with the ventilation control or building management system
A leak under a sink or in a technical room is often found days later. Leak detection places wireless sensors where water can appear and sends an alert through a gateway as soon as one of them gets wet
To check
Locations at risk: kitchens, bathrooms, plant rooms, server rooms
Alert path (SMS, e-mail, application) and who receives it
Battery life and the way a low battery is reported
A fridge that drifts at night can ruin a whole stock. Temperature loggers in cold rooms and trucks report through a gateway or a tracker and raise an alert when a threshold is crossed
To check
Temperature range and accuracy required by the product
Record keeping required by the applicable regulations
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
A building’s energy, comfort and occupancy data sit in separate systems. Sensors, meters and gateways feed one model of the building, room by room, to compare scenarios and steer the installations
Milesight sensors, LoRaWAN gateways and cellular routers can be brought together on the Milesight Development Platform, which manages the devices and passes their data to other applications through an API and webhooks
To check
Development Platform for device management, API and webhooks, or another network server and application
Devices provisioned through Milesight RPS must have that provisioning removed before being added to the Development Platform
Data flows to the customer’s own application through webhooks
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for UG56 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details