UR35 – Industrial 4G LTE router with PoE, Wi-Fi and serial ports

Industrial 4G LTE router with PoE, Wi-Fi and serial ports

Cellular Routers, Gateways and Modems

  • 1 × Micro SD Slot
  • 1.5 kV RMS
  • 2.5m CEP (Open Air)
  • Python SDK
Manufacturer part number
UR35
Manufacturer
Milesight IoT
Extendable Storage
1 × Micro SD Slot
Ethernet Isolation
1.5 kV RMS

Milesight UR35 industrial 4G LTE router combining cellular, Ethernet, Wi-Fi, optional PoE, serial interfaces and VPN tunnels for mission-critical IoT communications.

Product overview

Milesight UR35. The Milesight IoT UR35 industrial 4G LTE router is a cellular router from the Pro series, designed for mission-critical IoT communications. It combines 4G LTE (CAT 4) cellular connectivity, Ethernet, Wi-Fi and optional PoE.

Main characteristics. ARM Cortex-A7 processor at 528 MHz, 128 MB DDR3 RAM and 128 MB Flash memory, hardware watchdog that automatically recovers from various failures, two 50 Ω SMA antenna connectors and two Mini SIM-2FF SIM slots. The black metal housing measures 135 x 103 x 45 mm and weighs 485 g, with an IP30 ingress protection rating.

Interfaces and connectivity. Five RJ45 10/100 Mbps ports (1 × WAN and 4 × LAN), with optional 802.3 af/at PoE on the LAN ports (30 W max. per port, 60 W total). A serial port supports rates from 300bps to 230400bps, in transparent, Modbus Server/Client, Modbus RTU to Modbus TCP gateway and DLMS Client modes. A dry contact input and a wet contact output of 0.3A@30VDC complete the set. The router supports IEEE 802.11 b/g/n Wi-Fi at 2.4 GHz with up to 15 simultaneous connections, in AP or Client mode, and GPS/GLONASS/BDS/Galileo/QZSS reception with 2.5 m CEP positioning accuracy in open air.

Power and environment. Power input of 9-48 VDC (48 V required for PoE), with surge protection and reverse polarity protection. Typical consumption of 3.9 W, maximum 4.6 W in non-PoE mode. Operating temperature from -40°C to +70°C, with reduced cellular performance above 60°C, and storage temperature from -40°C to +85°C. Relative humidity from 0% to 95% non-condensing.

Security and networking. Radius, Tacacs+, LDAP and 802.1x authentication, firewall with ACL, DMZ, SYN-Flood protection and IP and domain filtering. IPsec, OpenVPN, L2TP, PPTP, GRE, WireGuard and ZeroTier VPN tunnels, with DMVPN spoke support. Network protocols include IPv4/IPv6, VRRP, OSPF, RIPv1/v2, MQTT and MQTTS, SNMP v1/v2c/v3 and TR069. Automated network backup between Ethernet, cellular (dual SIM) and Wi-Fi.

Configuration and integration. Configuration through web interface, CLI (SSH/Telnet), SMS, HTTP(s) API and Python SDK. Remote management via DeviceHub, Milesight Development Platform and MilesightVPN.

Typical uses. Cellular communication links for industrial equipment, with Modbus serial ports for connecting to PLCs and VPN tunnels for remote supervision. 1.5 kV RMS Ethernet isolation and compliance with EMC standards EN 55032 and EN 55035, and immunity tests IEC 61000-4-2 to 61000-4-11.

See all specifications

Highlights

  • AAA: Radius, Tacacs+, LDAP, Local Authentication, 802.1x
  • Antenna Connector: 2 × 50 Ω SMA Connectors (Center PIN: SMA Female)
  • App: Python SDK
  • Baud rate: 300bps to 230400bps
  • Built-in: Watchdog, Timer
  • Connector: 3.5mm Terminal Block

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote