UR41 – Compact 4G LTE CAT 1 Cellular Router for Embedded IoT

Compact 4G LTE CAT 1 Cellular Router for Embedded IoT

Cellular Routers, Gateways and Modems

  • 1.5 kV RMS
  • 2.5m CEP (Open Air)
  • 300bps to 230400bps
  • Watchdog, Timer
Manufacturer part number
UR41
Manufacturer
Milesight IoT
Ethernet Isolation
1.5 kV RMS
Positioning Accuracy
2.5m CEP (Open Air)

The Milesight UR41 is a compact, low-power 4G LTE CAT 1 cellular router for embedded IoT applications, with DLMS smart meter integration and GNSS positioning.

Product overview

Overview. The Milesight UR41 is a compact industrial 4G LTE (CAT 1) cellular router, reference UR41, designed for embedded IoT applications. It is built on an ARM Cortex-A7 processor at 528 MHz, with 128 MB DDR3 RAM, 128 MB Flash and a built-in watchdog.

Main characteristics. Metal black housing measuring 70 × 55 × 22 mm for 103 g, IP30 ingress protection, operating temperature from -40°C to +60°C and storage temperature from -40°C to +85°C, relative humidity from 0% to 95% non-condensing. The UR41 model includes a GNSS receiver (GPS/GLONASS/Beidou/Galileo/QZSS) with 2.5 m CEP positioning accuracy in open air.

Interfaces and connectivity. One RJ45 10/100 Mbps LAN port, one RS232 or RS485 port software-switchable with a selectable 120 Ω terminal resistor for RS485, one dry contact digital input, one wet contact digital output rated at 0.3 A maximum at 30 VDC, one 50 Ω SMA antenna connector, one Nano SIM (4FF) slot and one USB 2.0 Type-C port. Serial modes include Modbus TCP/RTU, Modbus gateway (Modbus RTU to Modbus TCP), DLMS client and transparent TCP, UDP and MQTT modes. Network protocols include IPv4/IPv6, PPP, SNMP v1/v2c/v3, OSPF, VRRP, MQTT, MQTTS, TR069, SSH and Telnet, among others.

Power and environment. Power input of 5 to 24 VDC via a 2-pin 3.5 mm terminal block with surge and reverse polarity protection, or 5 V/1 A via USB Type-C. Consumption of 6.3 mA at 12 V in standby, 70 mA at 12 V in idle mode and 157 mA at 12 V during data link. Power management with wake-up by schedule, SMS or digital input.

Security and VPN. SPI firewall, DMZ, port mapping, MAC binding, DoS and DDoS protection, IP and domain filtering. GRE tunnels, L2TP and PPTP clients, IPsec, OpenVPN, WireGuard, ZeroTier and DMVPN spoke support, together with the MilesightVPN service.

Management and integration. Configuration through the web interface, CLI over SSH or Telnet, SMS and SNMP. Remote management via DeviceHub, the Milesight Development Platform and TR069. Installation on desktop, wall or DIN rail.

See all specifications

Highlights

  • AAA: Radius, Tacacs+, LDAP, Local Authentication
  • Antenna Connector: 1 × 50 Ω SMA Connector (Center PIN: SMA Female)
  • Baud rate: 300bps to 230400bps
  • Built-in: Watchdog, Timer
  • Button: 1 × RESET
  • Connector: 3.5mm Terminal Block

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40°C to +60°C (-40°F to +140°F) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote