WT10x – LoRaWAN smart thermostat for radiator valve

LoRaWAN smart thermostat for radiator valve

HVAC Actuators and Dampers

  • 105℃
  • -20°C ~ +60°C
  • IN865/RU864/EU868
  • ± 0.5°C (0°C ~ 50°C)
Manufacturer part number
WT10X
Manufacturer
Milesight IoT
Maximum Temperature Range
105℃
Operating Temperature
-20°C ~ +60°C

The Milesight WT10x is a LoRaWAN smart radiator thermostat that automatically adjusts valve opening based on the room temperature measured. It suits large buildings and multi-unit residential premises.

Product overview

Milesight IoT WT10x, LoRaWAN smart radiator thermostat for valves. It is a valve actuator whose control continuously adapts to the temperature measured by its built-in NTC sensor. — Main characteristics: accuracy is ± 0.5 °C between 0 °C and 50 °C, with a resolution of 0.1 °C. A stepping motor adjusts the valve opening, and a white-light LED display shows the status. Functions include automatic temperature control, valve opening control, heat plans, freeze protection, open-window detection and a tamper alarm. — Connectivity: the protocol is LoRaWAN®, Class A, with OTAA and ABP modes, and configuration is done via NFC through the mobile app or by downlink. Sensitivity is -137 dBm and transmit power 16 dBm at 868 MHz, with a range of up to several hundred metres. The network relies on a LoRaWAN gateway, with no home Wi-Fi needed. — Power and environment: power comes from 2 replaceable 1.5 V Li-FeS2 AA batteries (3000 mAh in total), with a battery life of around 8 years in SF7 EU868, or typically 5 to 8 years. A Type-C USB port supports power supply, charging or connection of an external NTC sensor. The operating range is -20 °C to +60 °C, the ingress protection IP30, and CE and RoHS compliance is stated. — Adaptation: installation is by latching onto the valve. Compatible adapters cover Danfoss RA, RAVL and RAV, Giacomini GIA and standard M28 x 1.5 thread. — Typical uses: large buildings, hotels, multi-unit residential and campuses, where room-by-room regulation and heating plan scheduling are useful. The system integrates with coordinated HVAC control. The product is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Accuracy: ± 0.5°C (0°C ~ 50°C)
  • Actuator: Stepping Motor
  • Adapter Valve Types: Danfoss: RA, RAVL, RAV / Giacomini: GIA / Standard Thread: M28 x 1.5
  • Applicable Porducts: WT102
  • Applicable Products: WT101
  • B-Constant (25/85°C): 2585K ± 1%

Good to know before integrating

  • Thermal: rated operating range -20°C ~ +60°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote