Overview. The Netvox RB02I is a LoRaWAN wireless emergency alarm button used to trigger alarms and control terminals in smart home systems. It integrates an SX1276 module and push button status detection.
Main characteristics. Powered by 2 x 1.5 V AAA alkaline batteries, operating voltage 2.3 V to 3 V, low battery alarm voltage 2.4 V and battery measurement accuracy ±0.1 V. Standby current 14 µA. Dimensions 82 mm × 82 mm × 15 mm. Built-in antenna.
Radio. LoRa or FSK modulation (one of the two to be chosen), frequency range 863 MHz to 928 MHz and 470 MHz to 510 MHz, data transfer rate 0.3 kbps to 50 kbps. Receive sensitivity of -136 dBm in LoRa (Spreading Factor 12, 293 bps) and -121 dBm in FSK (frequency deviation 5 kHz, 1.2 kbps). RF emission current 120 mA at 3.3 V, RF receiving current 11 mA at 3.3 V. Communication distance up to 10 km in visible linear obstacle-free transmission, actual distance depending on the environment.
LoRaWAN bands. EU863-870, US902-928, AU915-928, KR920-923, AS923-1, AS923-2, AS923-3, IN865-867 and CN470-510, the band to be configured before shipment. Tx power depends on the band: 16 dBm for EU868, 20 dBm for US915, 14 dBm for KR920.
Environmental conditions. Operating temperature -20 °C to +55 °C, storage temperature -40 °C to +85 °C, ambient humidity below 90 %RH without condensation.
Typical uses. Emergency alarm triggering and control of terminals in LoRaWAN-based home automation and security systems, for example through Actility/ThingPark, TTN or MyDevices/Cayenne platforms.
Integration. LoRaWAN Class A compatible, configurable through a third-party software platform. Waterproof silicone sleeve protects against water splashes. Available on quotation from Atlas Electronics.