Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

877VL2 – PICMG 1.3 SBC Intel LGA1156 Core i7 dual Gigabit LAN

PICMG 1.3 SBC Intel LGA1156 Core i7 dual Gigabit LAN

ARM Single Board Computers

  • Ethernet
  • Arm architecture
Manufacturer part number
877VL2
Manufacturer
Nexcom

The Nexcom PEAK 877VL2 is a full-size PICMG 1.3 single board computer for Intel LGA1156 Core i7, i5, i3 and Pentium processors, with two Gigabit Ethernet ports and 6 SATA ports.

Product overview

Nexcom PEAK 877VL2. full-size PICMG 1.3 single board computer (SBC), dimensions 338.58 mm x 126.39 mm, designed for Intel LGA1156 processors such as Core i7, i5, i3 and Pentium.

Main characteristics. Intel Q57 Express PCH chipset, two 240-pin DIMM slots supporting up to 8 GB of non-ECC DDR3 memory at 1066 or 1333 MHz in dual channel configuration, and AMI BIOS with plug and play support and advanced power management.

Connectivity and interfaces. Intel 82578DM PHY compatible with Intel AMT 6.0 and Intel 82574L PCI Express Gigabit Ethernet controller, with boot from LAN (PXE) support, two RJ45 ports with LED. Six SATA ports, eight USB 2.0 ports, two COM ports and one parallel port. Analog VGA display through the integrated XGI Volari Z11 graphics engine with DDR2 SDRAM, up to 1600 x 1200 at 70 Hz in 16M colors.

Power and environment. Power supplied from the backplane through the golden finger connector, support for ATX and AT power supplies with +12V, +5V, +3.3V and +5Vsb. Board level operating temperature 0 °C to 60 °C, storage temperature -20 °C to 85 °C, relative humidity 10 % to 90 % non-condensing.

Monitoring and reliability. Monitoring of six voltages, three temperatures and two fan speeds, watchdog timer adjustable in 1-minute increments from 1 to 255 minutes or 1-second increments from 1 to 255 seconds, on-chip RTC with battery backup, and external Li-lon battery.

Integration. Board designed for embedded systems in the PICMG 1.3 format. CE approval and FCC Class A certifications.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote