The Omron A165E is a normally closed pushbutton switch, available with or without an LED indicator, for controlling and stopping equipment on control panels.
Allowable operating frequency — Electrical10 operations/minute max.
Allowable operating frequency — Mechanical20 operations/minute max.
Tightening tool — - — Useful for repetitive mounting. Be careful not to tighten excessively.A16Z-3004
Durability — Electrical — -100,000 operations min.
Durability — Mechanical — -100,000 operations min.
Extractor — - — Convenient for extracting the switch and lamp.A16Z-5080
Product overview
Overview. The Omron A165E is a pushbutton switch from the Pushbutton Switches category, offered in several configurations: SPST-NC, DPST-NC or TPST-NC contacts, 30 mm or 40 mm diameter, with or without a red 24 VDC LED indicator with solder terminal.
Main characteristics. Pretravel of 3.5 ± 0.5 mm, operating force of 14.7 N maximum and releasing force of 0.1 N·m minimum. Durability reaches 100,000 operations both electrical and mechanical, with an operating frequency of 10 operations per minute electrical and 20 per minute mechanical.
Power and environment. Operating ambient temperature from -10 to 55 °C, with no icing or condensation, and storage from -25 to 65 °C. Insulation resistance of 100 MΩ minimum at 500 VDC, dielectric strength of 1,000 VAC and 2,000 VAC depending on the terminals, and Class II protection against electric shock.
Typical use. This pushbutton suits start and stop control on control panels and electrical cabinets. A minimum applicable load of 1 mA at 5 VDC is required. Complementary accessories are available: extractor A16Z-5080, tightening tool A16Z-3004, panel plug A16ZT-3003 and yellow emergency stop nameplate A16Z-5070.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for A165E, with where it comes from. Use the filters to find one quickly.
All specifications (29)
Characteristic
Value
Allowable operating frequency — Electrical
10 operations/minute max.
Allowable operating frequency — Mechanical
20 operations/minute max.
Ambient temperature
Operating: -10 to 55°C (with no icing or condensation); Storage: -25 to 65°C (with no icing or condensation)
Dielectric Strength
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity; 2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each terminal and ground; 1,000 VAC, 50/60 Hz for 1 min between lamp terminals 1
Durability — Electrical — -
100,000 operations min.
Durability — Mechanical — -
100,000 operations min.
Extractor — - — Convenient for extracting the switch and lamp.
A16Z-5080
Insulation Resistance
100 MΩ min. (at 500 VDC)
LED — 24 VDC — Red — 30 dia. — Solder terminal — DPST-NC
A165E-LS-24D-02
LED — 24 VDC — Red — 30 dia. — Solder terminal — SPST-NC
A165E-LS-24D-01
LED — 24 VDC — Red — 40 dia. — Solder terminal — DPST-NC
A165E-LM-24D-02
LED — 24 VDC — Red — 40 dia. — Solder terminal — SPST-NC
The Omron A165E is a normally closed pushbutton switch, available with or without an LED indicator, for controlling and stopping equipment on control panels.
Allowable operating frequency — Electrical10 operations/minute max.
Allowable operating frequency — Mechanical20 operations/minute max.
Tightening tool — - — Useful for repetitive mounting. Be careful not to tighten excessively.A16Z-3004
Durability — Electrical — -100,000 operations min.
Durability — Mechanical — -100,000 operations min.
2. Datasheet extract (recorded values)
Parameter
Value
Allowable operating frequency — Electrical
10 operations/minute max.
Allowable operating frequency — Mechanical
20 operations/minute max.
Ambient temperature
Operating: -10 to 55°C (with no icing or condensation); Storage: -25 to 65°C (with no icing or condensation)
Dielectric Strength
1,000 VAC, 50/60 Hz for 1 min between terminals of same polarity; 2,000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each terminal and ground; 1,000 VAC, 50/60 Hz for 1 min between lamp terminals 1
Durability — Electrical — -
100,000 operations min.
Durability — Mechanical — -
100,000 operations min.
Extractor — - — Convenient for extracting the switch and lamp.
A16Z-5080
Insulation Resistance
100 MΩ min. (at 500 VDC)
LED — 24 VDC — Red — 30 dia. — Solder terminal — DPST-NC
A165E-LS-24D-02
LED — 24 VDC — Red — 30 dia. — Solder terminal — SPST-NC
A165E-LS-24D-01
LED — 24 VDC — Red — 40 dia. — Solder terminal — DPST-NC
A165E-LM-24D-02
LED — 24 VDC — Red — 40 dia. — Solder terminal — SPST-NC
Panel plug — Round — Used for covering the panel cutouts for future panel expansion.
A16ZT-3003
Pretravel (PT)
3.5±0.5 mm; (3±0.5 mm In case of A165E_U series)
Protection against electric shock
Class II
Rated Voltage
Resistive load
Rated voltage — A165E series
A165E_-U series
Releasing force (RF) min.
0.1 N·m
Switches — Rated voltage — Pushbutton color — Pushbutton size — Terminal — Contact
Order code
Tightening tool — - — Useful for repetitive mounting. Be careful not to tighten excessively.
A16Z-3004
Yellow plate — Yellow, 45 dia. — Use this as an emergency stop nameplate.
A16Z-5070
Alternatives and comparable products
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productOmron
A165E
Pushbutton switch with LED indicator and NC contacts
Allowable operating frequency — Electrical
10 operations/minute max.
Allowable operating frequency — Mechanical
20 operations/minute max.
Tightening tool — - — Useful for repetitive mounting. Be careful not to tighten excessively.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details