G9SR-EX031-T90-RC – 24 VDC safety relay with PNP solid-state and contact outputs

24 VDC safety relay with PNP solid-state and contact outputs

Safety Relays

  • 5 A
  • Order code
  • G9SR-EX031-T90-RC
  • 100,000 cycles min.
Manufacturer part number
G9SR
Manufacturer
Omron
Rated carry current — -
5 A
Durability — Electrical — -
100,000 cycles min.

The Omron G9SR-EX031-T90-RC safety relay runs on 24 VDC and provides three PST-NO contacts plus a PNP transistor auxiliary output. It is intended for switching off safety circuits.

Product overview

Overview. The Omron G9SR-EX031-T90-RC is a G9SR safety relay from the Safety Relays category, with ordering code G9SR-EX031-T90-RC.

Main characteristics. It provides 3 PST-NO contacts and 1 PNP transistor auxiliary output rated at 500 mA maximum. The terminals are removable cage clamp terminals.

Power supply. The rated supply voltage is 24 VDC (19.2 to 28.8 VDC, that is 24 VDC ±20%). Power consumption is not stated in the data.

Safety and feedback/reset inputs. The safety and feedback/reset inputs operate from 17 VDC to 28.8 VDC, with an internal impedance of approximately 3 kΩ.

Contacts and service life. The rated load is 250 VAC, 5 A AC15 (inductive load), with a rated carry current of 5 A and a maximum switching voltage of 250 VAC. Electrical durability is at least 100,000 cycles and mechanical durability at least 10,000,000 cycles.

Response times. Operating time (OFF to ON) is 150 ms maximum and response time (ON to OFF) is 50 ms maximum.

Environmental conditions. The permissible ambient temperature range is -10 to 55 °C, with no icing or condensation.

Use. This relay can be integrated into a safety circuit to disconnect a load in the event of a fault, using its contacts and its PNP solid-state output.

See all specifications

Highlights

  • - — 3 PST-NO (contact) 1 — 1 (solid state) PNP transistor outputs — 24 VDC — removable cage clamp terminals: G9SR-EX031-T90-RC
  • Ambient temperature: -10 to 55°C (with no icing or condensation)
  • Durability — Electrical — -: 100,000 cycles min.
  • Durability — Mechanical — -: 10,000,000 cycles min.
  • Instantaneous — Auxiliary outputs — No. of input channels — Rated voltage — Terminal block type: Order code
  • Instantaneous — ON/OFF-delayed — Auxiliary outputs — Rated voltage — Terminal block type: Order code

Good to know before integrating

  • Power: plan for a supply compatible with 19.2 to 28.8 VDC (24 VDC ±20%).

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Safety Relays
Request a quote