Overview. The Oring IDS-4312D+ wireless device server is an industrial serial-to-Ethernet server with one RS-232/422/485 serial port, an IEEE 802.11b/g/n Wi-Fi interface and two 10/100Base-T(X) Ethernet ports.
Main characteristics. The WLAN link speed reaches up to 150 Mbps in 802.11n (40 MHz). The serial baud rate ranges from 110 bps to 460.8 Kbps, with 7 or 8 data bits, 1, 1.5 or 2 stop bits and odd, even, none, mark and space parity. Flow control supports XON/XOFF, RTS/CTS and DTR/DSR.
Operating modes and interfaces. The device operates in Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP and Modbus gateway modes. It supports ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS and SMTP. It is fitted with an external reverse SMA-type antenna connector and provides one DI and one DO.
Security. WEP (64-bit and 128-bit keys), WPA/WPA2 with AES, WPA-PSK (256-bit pre-shared key) and 802.1X authentication are supported.
Power and environment. Dual DC inputs at 12 to 48 VDC on a 4-pin terminal block, with reverse polarity protection and overload current protection. Typical power consumption of 7 W maximum. IP-30 enclosure, operating temperature −25 to 70 °C, operating humidity 5 to 95 % non-condensing, dimensions 45 x 81 x 95 mm, weight 395 g.
Typical uses. The server connects serial PLCs and instruments to the network, notably through Modbus TCP/RTU, and can transfer data to several hosts.
Compliance. Meets CE EMC (EN 55024, EN 55032), FCC Part 15 B, UL61010-1/-2-201 and EN 61000-3-2 requirements.