IOT-WIFI-MODULE_DE
Ultra-compact UART Wi-Fi module 802.11b/g/n

- Operating temperature
- -20~ 85°C
- Data interface
- UART
- External interface
- SIP
- Physical Interfaces
- 1.8V/3V(with slot)
Ultra-compact UART Wi-Fi module 802.11b/g/n
The PUSR USR-C215b Wi-Fi module transmits serial UART data over a 2.4 GHz wireless network using 802.11b/g/n standards, in a compact 22 x 13.5 x 6 mm footprint.
Overview. The PUSR USR-C215b is a UART Wi-Fi IoT module designed for transparent serial data transmission. It integrates the MAC, the baseband chip and the RF transceiver, and supports the WiFi and TCP/IP protocols.
Main characteristics. The module follows the 802.11 b/g/n standard in the 2.4 GHz band and supports WPA-PSK and WPA2-PSK security. It operates in AP, STA or AP+STA mode. Its size is 22 x 13.5 x 6 mm and its operating temperature ranges from -20 to 85 °C.
Interfaces and connectivity. The module provides a UART data interface, an RS485 serial port on terminal, an external antenna through an I-PEX connector and an external SIP interface. Configuration is done with AT commands or through a web page. Supported network protocols are IPv4, TCP/UDP, DNS, HTTP, MQTT, SSL and TLS.
Power and environment. The operating voltage is DC 3.0 to 3.6 V. Current consumption is 74 mA average and 285 mA peak in AP mode, and 32 mA average and 196 mA peak in STA mode. The storage temperature ranges from -55 to 125 °C.
Typical uses. The module suits wireless remote control and monitoring, instrument and data acquisition equipment, handheld terminals and smart home applications, thanks to its UART link and small footprint.
Integration. Setup is performed with the USR-Cat1 configuration utility and AT+command instructions.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for IOT-WIFI-MODULE_DE, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Operating temperature | -20~ 85°C |
| Antenna | External: I-PEX connector |
| Data interface | UART |
| Encryption type | TKIP, AES, TKIP/AES |
| External interface | SIP |
| Frequency Bands | B1/B3/B7/B8/B20/B28 |
| Hardware Characteristics | 9V~36V |
| LTE Category | LTE Cat.1 |
| Network Protocol | IPv4, TCP/UDP |
| Operating Current | AP: 74mA (average), 285mA (peak); STA: 32mA (average), 196mA (peak) |
| Operating Voltage | DC 3.0~3.6V |
| Others | USR-Cat1Configuration Utility |
| Packaging mechanism | 10~500,default50 |
| Physical Interfaces | 1.8V/3V(with slot) |
| Receive sensitivity | 802.11b: -85 dBm (@11Mbps, CCK); 802.11g: -70 dBm (@54Mbps, OFDM); 802.11n: -68 dBm (@HT20, MCS7) |
| RX Sensitivity | -109.5dBm |
| Security mechanism | WPA-PSK/WPA2-PSK |
| Serial Parameters | RS485(Terminal)*1 |
| Size | 22 x 13.5 x 6mm |
| Software | TCP/UDP/IPV4/IPV6/ /DNS/HTTP/MQTT/SSL/TLS |
| Storage Temp | -55~ 125°C |
| Transmission Speed | 10MbpsDL/5Mbps UL |
| Transmit Power | 802.11b: +18 +/-1dBm (@11Mbps); 802.11g: +17 +/-1dBm (@54Mbps); 802.11n: +15 +/-1dBm (@HT20, MCS7) |
| Tx Power | 23dBm±2dB |
| User Configuration | AT+command; Webpage setting |
| Wireless Network Type | AP, STA, AP+STA |
| Wireless Standard | 802.11 b/g/n |
No specification matches.
Last verification : 2026-11-03
Official documents and the technical data recorded for IOT-WIFI-MODULE_DE. For a missing document or a specific revision, our experts send it to you.
The PUSR USR-C215b Wi-Fi module transmits serial UART data over a 2.4 GHz wireless network using 802.11b/g/n standards, in a compact 22 x 13.5 x 6 mm footprint.
| Parameter | Value |
|---|---|
| Operating temperature | -20~ 85°C |
| Antenna | External: I-PEX connector |
| Data interface | UART |
| Encryption type | TKIP, AES, TKIP/AES |
| External interface | SIP |
| Frequency Bands | B1/B3/B7/B8/B20/B28 |
| Hardware Characteristics | 9V~36V |
| LTE Category | LTE Cat.1 |
| Network Protocol | IPv4, TCP/UDP |
| Operating Current | AP: 74mA (average), 285mA (peak); STA: 32mA (average), 196mA (peak) |
| Operating Voltage | DC 3.0~3.6V |
| Others | USR-Cat1Configuration Utility |
| Packaging mechanism | 10~500,default50 |
| Physical Interfaces | 1.8V/3V(with slot) |
| Receive sensitivity | 802.11b: -85 dBm (@11Mbps, CCK); 802.11g: -70 dBm (@54Mbps, OFDM); 802.11n: -68 dBm (@HT20, MCS7) |
| RX Sensitivity | -109.5dBm |
| Security mechanism | WPA-PSK/WPA2-PSK |
| Serial Parameters | RS485(Terminal)*1 |
| Size | 22 x 13.5 x 6mm |
| Software | TCP/UDP/IPV4/IPV6/ /DNS/HTTP/MQTT/SSL/TLS |
| Storage Temp | -55~ 125°C |
| Transmission Speed | 10MbpsDL/5Mbps UL |
| Transmit Power | 802.11b: +18 +/-1dBm (@11Mbps); 802.11g: +17 +/-1dBm (@54Mbps); 802.11n: +15 +/-1dBm (@HT20, MCS7) |
| Tx Power | 23dBm±2dB |
| User Configuration | AT+command; Webpage setting |
| Wireless Network Type | AP, STA, AP+STA |
| Wireless Standard | 802.11 b/g/n |
Points to check before using IOT-WIFI-MODULE_DE in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | AP: 74mA (average), 285mA (peak); STA: 32mA (average), 196mA (peak) |
| Operating Voltage | DC 3.0~3.6V |
| Transmit Power | 802.11b: +18 +/-1dBm (@11Mbps); 802.11g: +17 +/-1dBm (@54Mbps); 802.11n: +15 +/-1dBm (@HT20, MCS7) |
| Tx Power | 23dBm±2dB |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of IOT-WIFI-MODULE_DE can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Serial Parameters": RS485(Terminal)*1.
Yes — recorded under "LTE Category": LTE Cat.1.
-20~ 85°C (source: Operating temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Ultra-compact UART Wi-Fi module 802.11b/g/n

WiFi Espressif ESP32

WiFi and BLE Espressif ESP32-WROVER — RAK11200 WiFi and BLE Espressf ESP32-WROVER with Arduino Open Source

WiFi and BLE Espressif ESP32-WROVER — RAK11200 WiFi and BLE Espressf ESP32-WROVER with Voice Processing

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | IOT-WIFI-MODULE_DE |
| Manufacturer | PUSR |
Wi-Fi and Bluetooth Modules
Wi-Fi and Bluetooth LE module with PCB antenna · Ref. : ESP32-S3-WROOM-1-N4R2
Price on request
Wi-Fi and Bluetooth Modules
M.2 2230 Wi-Fi 6 and Bluetooth 5.3 Card · Ref. : AP12275-M2
Price on request
Wi-Fi and Bluetooth Modules
802.11b/g/n Wi-Fi and Bluetooth SoC Module · Ref. : MCC32SESP
Price on request
Wi-Fi and Bluetooth Modules
Wi-Fi and NFC module with ARM Cortex-M3 microcontroller · Ref. : DFR0477
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details