Overview. The USR-N916 from PUSR is a rack-mount Edge Serial Device Server that connects serial and CAN equipment to an Ethernet network and performs protocol conversion at the edge. It is built on an industrial triple-core RK3506J processor and the WukongEdge engine, running Linux.
Main characteristics. It provides 16 fully isolated RS485 channels, independently isolated in groups of 4, with baud rates from 1200 to 230400 bps, 7 or 8 data bits, NONE, ODD or EVEN parity and 1 or 2 stop bits. A 120Ω termination resistor is built in and software controllable. It also offers 2 CAN FD channels, compatible with CAN2.0, with shared isolation. Memory is 512MB DDR3 and 8GB eMMC, expandable with a Micro SD card up to 32GB.
Interfaces and connectivity. Four 10/100Mbps RJ45 Ethernet ports compliant with IEEE 802.3, including one switchable WAN/LAN port and three LAN ports, with a built-in 1.5KV network isolation transformer. Output protocols include Modbus TCP and OPC UA, plus Someone Cloud, MQTT, TCP, UDP and HTTP with TLS encryption. Southbound collection supports Modbus RTU and Modbus TCP, as well as Mitsubishi FX, FATEK, Siemens, Omron and Delta PLC protocols, IEC104, IEC61850, DNP3.0, DL645, HJ212, SL651 and BACnet.
Power and environment. AC input 110 to 250V 50/60Hz, or DC 12 to 48V through a 2-pin industrial terminal block with reverse polarity protection. Operating range -25°C to 75°C, humidity 5% to 95% RH non-condensing, IP30 sheet metal housing, rack mount. EMC immunity at IEC Level 3 for electrostatic discharge, surge and electrical fast transient/burst.
Typical uses. Collecting data from PLCs and serial equipment, forwarding data to third-party platforms through custom JSON reporting, and consolidating measurement points with local calculation across more than 2000 points at millisecond response.