USR-SDR041 – Industrial Ethernet switch, 4 ports 10/100 with fiber port

Industrial Ethernet switch, 4 ports 10/100 with fiber port

Industrial Ethernet Switches, PoE & TSN Networking

  • -40℃~+85℃
  • -20℃~+70℃
  • PWR,Link/ACT
  • 10/100 Base - T
Manufacturer part number
SDR041
Manufacturer
PUSR
Interface — LED indicators
PWR,Link/ACT
Serial Interface — Parity
NONE,ODD,EVEN

The PUSR USR-SDR041 industrial Ethernet switch provides four 10/100 Mbps ports and one 100Base-FX fiber port to extend an industrial network. It mounts on a DIN rail.

Product overview

Overview. The PUSR USR-SDR041 industrial Ethernet switch is a 4-port Ethernet switch that works without configuration, extending the number of ports of an industrial network and enhancing its reliability.

Main characteristics. The switch provides 4 ports 10/100M and one 100Base-FX port, with a switching capacity of 1G, a packet forwarding rate of 0.744Mpps, a 512K buffer and a 1K MAC address table. It supports flow control, jumbo frames of 2048 bytes and MDI/MDIX.

Interfaces and connectivity. The fiber port supports monomode fiber up to 100 km and multimode fiber up to 550 m. CAT5E and CAT6 twisted-pair cables are usable up to 100 m. Bus, star and tree topologies are supported.

Power and environment. Power is supplied at DC 10-58V through a Phoenix terminal block with redundant dual power supply and reverse polarity protection. Consumption is below 5 W. The aluminium alloy housing, rated IP40, operates between -40℃ and +85℃, with 5% to 95% relative humidity non-condensing. It mounts on a DIN rail and requires no fan.

Protection. The switch is protected against surges on the Ethernet ports and the power supply according to IEC 61000-4-5 level 3, and against electrostatic discharge according to IEC 61000-4-2 level 4. Its electromagnetic emission is class A.

Typical uses. The switch suits network transmission in intelligent transportation and video surveillance applications, where high-definition cameras increase data volume and bandwidth demand.

See all specifications

Highlights

  • Cable type — Monomode optical fiber: 20/40/60/80/100KM
  • Cable type — Multimode (optical) fiber: 550m
  • Cable type — Twisted-pair: 100m (CAT5E, CAT6)
  • Cellular; Interface — SIM card: 1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots
  • Certificate: CE,CCC
  • Device; management — Configuration: Web

Good to know before integrating

  • Thermal: rated operating range -40℃~+85℃ — check it against the installation environment.
  • Thermal: rated operating range -20℃~+70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote