Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

USR-SDR050 – Unmanaged industrial 5-port Ethernet switch, DIN rail mount

Unmanaged industrial 5-port Ethernet switch, DIN rail mount

Unmanaged Compact DIN Rail Switches

  • Ethernet
Manufacturer part number
SDR050
Manufacturer
PUSR

The PUSR USR-SDR050 is an unmanaged industrial Ethernet switch with 5 ports at 10/100 Mbps, designed for DIN rail mounting. It extends networks in industrial sites and intelligent transport systems.

Product overview

PUSR USR-SDR050 is an unmanaged industrial Ethernet switch with 5 ports, designed to extend industrial networks without configuration. — The product provides five RJ45 10/100 Mbps Ethernet ports with automatic MDI/MDIX detection, a switching capacity of 1G, and a packet buffer of 448K to 512K. It supports jumbo frames up to 2048 bytes and has a MAC address table of 1K entries.

Connectivity. The Ethernet ports support bus, star and tree topologies, with a 100 m reach over CAT5E or CAT6 twisted pair. The product includes a UART TTL 3.3V serial port with baud rates from 600 bps to 1 Mbps, parity, data bit and flow control options (None, RTS/CTS, XON/XOFF), and 2.2 KΩ RS-485 pull-up and pull-down resistors. It supports Modbus TCP, IP/TCP/UDP, DHCP, DNS, HTTP and Websocket, configurable by setup utility, web page or AT commands.

Power and environment. Power is supplied through a terminal block with double power redundancy, from 10 to 58 V DC according to the datasheet. The product operates between -40 °C and +85 °C, at 5% to 95% RH non-condensing, with fanless natural heat dissipation. The aluminum alloy housing is rated IP40. Consumption is below 3 W in normal operation. It is certified CE, FCC and RoHS, with Ethernet surge protection to IEC61000-4-5 level 3 and electrostatic discharge immunity to IEC61000-4-2 level 4.

Typical uses. The switch suits network transmission in intelligent transport systems, where high-definition cameras increase bandwidth demand. It also connects PLCs and Modbus TCP or RS-485 devices to the network.

Integration. Mounting is on DIN rail. The product is available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote