Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

USR-SDR080 – Industrial unmanaged Ethernet switch 8 ports 10/100M DIN rail

Industrial unmanaged Ethernet switch 8 ports 10/100M DIN rail

Unmanaged Compact DIN Rail Switches

  • Ethernet
Manufacturer part number
SDR080
Manufacturer
PUSR

The PUSR USR-SDR080 is an unmanaged industrial Ethernet switch with 8 ports 10/100M, designed to extend the network of industrial sites and video surveillance systems on DIN rail.

Product overview

Overview. The PUSR USR-SDR080 industrial Ethernet switch is an unmanaged 8-port 10/100M switch, delivered without configuration and ready to use once connected. It is designed to expand the number of network ports in an industrial installation and improve the reliability of its network.

Main characteristics. The switch provides 8 RJ45 10/100M ports with auto-negotiation and automatic MDI/MDIX, a switching capacity of 1.6G, a packet forwarding rate of 1.19Mpps, a 1K MAC address table and a 512K buffer. It supports 2048-byte jumbo frames and flow control. Its MTBF is 100000 hours.

Interfaces and connectivity. The 8 10/100 Base-T Ethernet ports are indicated by PWR and Link/ACT LEDs. Bus, star and tree topologies are supported. Twisted-pair cables of up to 100m (CAT5E, CAT6) are compatible.

Power and environment. Power is supplied at DC 10-58V through a Phoenix terminal block with redundant dual power supply. Consumption is below 6W in the normal model and below 126W in the POE model. The aluminium housing is fanless and dissipates heat naturally. It operates between -40℃ and +85℃, with 5% to 95% relative humidity non-condensing, and has an IP40 protection rating.

Protection against disturbances. The switch meets Class A EMI requirements and carries CE, FCC and RoHS certifications. It withstands electrostatic discharge per IEC 61000-4-2 level 4, and surges per IEC 61000-4-5 level 3 on the Ethernet ports and on the power supply.

Typical uses. The USR-SDR080 suits the transmission of high-definition camera data in video surveillance and intelligent transportation networks, where bandwidth must be shared between several video streams.

Integration. It mounts on DIN rail or panel. Configuration, if needed, is done through a setup utility, a web page or AT commands. The product is available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote