Overview. The PUSR USR-TCP232-306 is a serial-to-Ethernet device server that connects a device with an RS232, RS485 or RS422 serial link to an Ethernet network. Only one of these three interfaces can be used at a time.
Main characteristics. 10/100 Mbps Ethernet RJ45 port with automatic MDI/MDIX, ARM Cortex-M0 processor at 48 MHz, baud rates from 600 to 230.4 Kbps, 5 to 8 data bits, 1 or 2 stop bits and parity none, odd, even, mark or space. Network packet cache of 6K bytes for sending and 4K bytes for receiving, serial receive cache of 2 KB. Work modes TCP Server, TCP Client, UDP Server, UDP Client and Httpd Client, with up to 16 TCP clients in server mode.
Interfaces and connectivity. 10/100 Mbps Ethernet via an RJ45 port; RS232, RS485 and RS422 serial links. Network protocols IP, TCP/UDP, DHCP, RCMP, HTTP, IPv4 and DNS, with DHCP or static IP addressing. Modbus RTU to Modbus TCP gateway with multi-host Modbus polling, to connect a PLC or a SCADA system. Customized RFC2217, heartbeat packets and registration packets.
Power and environment. DC input of 5.0 to 36.0 V on a 5.5 × 2.1 mm connector and 2-pin terminal block, or 5.0 to 7.0 V on a 5.5 × 2.1 mm connector. Consumption of 116 mA at 5 V and 53 mA at 12 V. Operating temperature range -25 to 75 °C, storage -40 to 105 °C, humidity 5% to 95% RH non-condensing. CE certified and IEC61000 EMC level 3 (surge, ESD, EFT). Wall mounting, dimensions 98.0 × 86.0 × 25.0 mm.
Typical uses. Connecting existing serial equipment (PLCs, measuring instruments, LED displays, RFID card readers, ticket printers) to an Ethernet network for remote monitoring or control. Example application: unattended weighing, where the server allows remote control of gate switches from the control centre.
Integration. Configuration by AT commands, built-in webpage or configuration software. User-defined webpage and reload button; Virtual-COM software extends the serial link over the network.