USR-WIFI232 – RS232/RS485 to WiFi or Ethernet Serial Wireless Server

RS232/RS485 to WiFi or Ethernet Serial Wireless Server

Modular DIN-Rail Remote I/O Modules

  • -40 ~ 85°C
  • 2.412 GHz ~ 2.484 GHz
  • SMA
  • DC 5 ~ 40 V
Manufacturer part number
USR-WIFI232
Manufacturer
PUSR
Operating temperature
-40 ~ 85°C
Frequency Range
2.412 GHz ~ 2.484 GHz

The USR-WIFI232 is a PUSR wireless serial server that connects RS232 or RS485 equipment to a WiFi or Ethernet network, with transparent transmission and Modbus RTU to Modbus TCP conversion.

Product overview

USR-WIFI232. The PUSR USR-WIFI232 is an RS232/RS485 to WiFi or Ethernet serial server with two RJ45 ports, designed to connect serial equipment to an existing network.

Main characteristics. MIPS 32-bit processor at 360 MHz, 8 MB RAM and 1 MB Flash, 4 KB send and receive buffers. Serial baud rates from 300 bps to 460800 bps, 5 to 8 data bits, 1 or 2 stop bits, RTS/CTS flow control.

Interfaces and connectivity. 802.11 b/g/n standard on 2.412 GHz to 2.484 GHz, AP, Station and AP+Station network modes, SMA antenna interface with a 3 dBi antenna supplied. Two 8-pin RJ45 Ethernet ports at 10/100 Mbps with optional LAN/WAN switching. Protocols IP, TCP, UDP, DHCP, DNS, HTTPS, ARP, ICMP and WebSocket. WEP 64/128-bit, WPA, WPA2 and 802.11i security with TKIP and AES encryption. Modbus function for conversion between Modbus TCP and Modbus RTU.

Power and environment. DC input of 5 to 40 V, consumption of 170 to 350 mA at 5 V. RS-485 line protection against surge, lightning and overcurrent, 2 kV electromagnetic isolation. Operating range -40 to 85 °C, storage -40 to 125 °C, humidity 5 to 95 % without condensation. Housing 103 x 105 x 28 mm.

Typical uses. Remote monitoring and control of serial equipment, extension of a serial link over WiFi, connection of Modbus RTU devices or PLCs to a Modbus TCP network.

Integration. Configuration through the built-in webpage, set-up software or serial AT commands. USR-VCOM virtual serial software for Windows 2000 and later (32 and 64 bit). Firmware upgrade through the webpage.

See all specifications

Highlights

  • Operating temperature: -40 ~ 85°C
  • Accessory: 5V1A power supply, serial line, cable, 3dbi antenna
  • Antenna interface: SMA
  • Baud rate: 300 bps ~ 460800 bps
  • Buffer: Send and receive 4K bytes respectively
  • Certificate: TELEC, IC

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40 ~ 85°C — check it against the installation environment.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote