USR-W630 – RS232/RS485 to WiFi and Ethernet converter with Modbus gateway

RS232/RS485 to WiFi and Ethernet converter with Modbus gateway

Serial-to-Ethernet Device Servers (RS-232/422/485)

  • -40℃~ 85℃
  • -20℃~+70℃
  • 2.400 GHz – 2.4835 GHz
  • 1 x SMA-K
Manufacturer part number
W630
Manufacturer
PUSR
Operating temperature
-40℃~ 85℃
Frequency Range
2.400 GHz – 2.4835 GHz

The PUSR USR-W630 is a WiFi and Ethernet to RS232/RS485 serial converter that links field serial equipment to a remote SCADA system over TCP, UDP or MQTT.

Product overview

PUSR USR-W630 converter. The PUSR USR-W630 is a WiFi and Ethernet to RS232/RS485 serial converter that provides two-way communication between serial equipment on site and a remote SCADA system. It integrates network protocols such as MQTT, TCP and UDP and supports several networking modes.

Main characteristics. Transparent transmission between RS485 and WiFi or Ethernet via TCP, UDP and HTTP, serial command mode for sending data to different servers, Modbus RTU to Modbus TCP gateway with multi-host polling, websocket function for real-time interaction with a web page. RS232 serial rate from 300 to 460.8 Kbps and RS485 from 300 to 230.4 Kbps. Rx/TX buffer up to 16K bytes.

Interfaces and connectivity. One WAN port configurable as LAN and one LAN port, 10/100 Mbps compliant with IEEE 802.3 with auto MDI/MDIX. WiFi 802.11 b/g/n at 2.4 GHz with AP, STA and AP+STA modes, WEP, WPA/WPA2-PSK with TKIP/AES encryption. Network protocols TCP, UDP, ARP, ICMP, DHCP, DNS and HTTPS. Security: SSL/TLS encryption in TCP client, HTTP client and MQTT modes, firewall with IP, domain name and MAC address filtering, and PPTP, L2TP, GRE, IPSEC and OPENVPN VPN. Networking modes: bridge and router, static routing, DHCP server, NAT.

Power and environment. DC input from 9 to 36 V with reverse polarity protection, 12 V/1 A adaptor and 2-pin industrial terminal block. Average consumption of 175 mA at 12 V. Operating temperature from -20 °C to +70 °C, metal housing rated IP30, panel or DIN-rail mounting. 2 kV electromagnetic isolation on the Ethernet port.

Management and operation. Configuration through web interface or AT commands, remote management by Telnet, SSH and SNMP, remote monitoring and upgrade through the PUSR platform, alarms by email and SMS, DDNS, NTP and timed tasks. Reset button and embedded watchdog.

Typical uses. Forwarding data from Modbus RTU PLCs and serial devices to a SCADA system over WiFi or Ethernet, remote monitoring of isolated sites.

See all specifications

Highlights

  • Operating temperature: -40℃~ 85℃
  • Buffer: Rx/TX: Max 16K bytes
  • Cellular; Interface — SIM card: 1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots
  • Certificate: FCC/CE
  • Configuration: Web sever+ AT command
  • Device; management — Configuration: Web

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -40℃~ 85℃ — check it against the installation environment.
  • Thermal: rated operating range -20℃~+70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote