RAK5801 – Two-channel 4-20 mA current interface module

Two-channel 4-20 mA current interface module

Maker, Prototyping, Open-Hardware & Developer Boards

  • -30 °C ~ 65 °C
  • 2 channels of 4-20 mA
  • 3.0-3.6 V
  • 49.9 Ω
Manufacturer part number
100012
Manufacturer
RAKwireless
Operating Temperature
-30 °C ~ 65 °C
Analog Input Interface
2 channels of 4-20 mA

RAKwireless RAK5801 WisBlock interface module that converts two 4-20 mA current signals into a voltage readable by a WisBlock Core, to connect industrial sensors to an IoT solution.

Product overview

RAKwireless RAK5801. The RAK5801 is a WisBlock interface module that adds 4-20 mA current loop inputs to the WisBlock system. It must be combined with a WisBlock Core module and a base module to form a production-ready modular IoT solution.

Main characteristics. The module provides two 4-20 mA analog inputs. It converts the current signal into voltage using a 49.9 Ω sampling resistor, with a sampling resolution of 0.005 mA and a sampling accuracy of 1%. The maximum analog input current is 25 mA. The operational amplifier gain is 3.0.

Power and environment. The module operates from an input voltage of 3.0 to 3.6 V and provides a 12 V output to power external sensors, with a maximum output current of 30 mA. Operating temperature ranges from -30 °C to 65 °C and storage temperature from -40 °C to 85 °C. Module dimensions are 35 x 25 mm.

Interfaces and connectivity. Fast crimping terminals allow connection of 2-wire, 3-wire or 4-wire 4-20 mA sensors and of the I2C bus. The analog ports have a 2 kV HBM ESD protection level. A reserved I2C expansion interface is included.

Typical use and integration. The RAK5801 is compatible with the RAK4631 and fits the IO slot of the RAK5005-O base board. Combined with a WisBlock Core, it connects industrial sensors and actuators to LoRaWAN, LoRa point-to-point or BLE communication. Its low power consumption and the ability to power it down completely from the WisBlock Core suit battery-powered applications.

Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Output voltage: 12 V
  • Analog Input Interface: 2 channels of 4-20 mA
  • Analog Maximum Input Current: 25 mA (There is a risk to burn the circuit surpassing this limit.)
  • Analog Port ESD Protection Level: 2 kV HBM
  • Analog Sampling Accuracy: 1%
  • Analog Sampling Resolution: 0.005 mA

Good to know before integrating

  • Thermal: rated operating range -30 °C ~ 65 °C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote