RAK18031 – PDM Microphone Interposer Kit for WisBlock, with Enclosure

PDM Microphone Interposer Kit for WisBlock, with Enclosure

Microcontroller Development Boards

Manufacturer part number
110140
Manufacturer
RAKwireless

WisBlock audio interposer kit combining the RAK18031 PDM microphone with the RAK18003 interposer, in a gray enclosure. It adds audio capture to a WisBlock base board.

Product overview

Overview. The RAKwireless WisBlock Microphone Interposer Kit RAK18031 combines a 100 Hz to 10 kHz PDM microphone based on the STMicroelectronics MP34DT06J with the RAK18003 audio interposer. It stacks on a single WisBlock IO slot, with the stacking screws and cables included. A base board and a WisCore are required.

Main characteristics. Nominal sensitivity of -26 dBFS (94 dB SPL at 1 kHz) and signal-to-noise ratio of 64 dB(A). Current consumption is 650 µA in normal mode (VDD = 1.8 V, clock at 2.4 MHz) and 5 µA maximum in sleep mode.

Interfaces and connectivity. The microphone connects to the board through MIC_PDM1_DATA and MIC_PDM1_CLK, with a MIC_CTR(IO1) control signal. The input clock is nominally 2.4 MHz, within a range of 1.2 to 3.25 MHz. The board includes an SD card slot for configuration or logging; audio files cannot be saved to the SD card.

Power and environment. Supply voltage VDD of 1.6 to 3.6 V, nominally 3.3 V, with an operating temperature range of -40 °C to +85 °C.

Enclosure. Gray WisBlock Audio enclosure with a hole for the microphone and M8, SMA and USB holes on the base, for installation in an enclosed environment.

Typical uses. Suited to audio capture on a WisBlock platform, such as voice recognition or sound detection, with the Arduino and Voice Processing versions. The Voice Processing version includes a Cyberon License.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote