RAK19007+RAK4631-R – WisBlock LoRaWAN and BLE Starter Kit, base board and Core module

WisBlock LoRaWAN and BLE Starter Kit, base board and Core module

Microcontroller Development Boards

  • 350 mA
  • At least 500 mA
  • Current: 10; Unit: µA
  • Current: 2; Unit: µA
Manufacturer part number
114014
Manufacturer
RAKwireless
Charging current
350 mA
Discharge current
At least 500 mA

RAKwireless starter kit combining the RAK19007 WisBlock base board and the RAK4631-R LoRaWAN and BLE Core module, for modular IoT prototyping, IN865 version.

Product overview

Overview. The RAKwireless WisBlock Starter Kit RAK19007+RAK4631-R combines the RAK19007 base board with a removable RAK4631-R Core module, IN865 version, to evaluate and prototype modular IoT devices without custom hardware design. The Core module can be replaced without changing the base board, so the connectivity path can change.

Connectivity. The RAK4631-R module combines LoRaWAN and LoRa with Nordic nRF52840 Bluetooth Low Energy (Bluetooth 5) and runs the low-power RUI3 firmware. It is set for the IN865 frequency band.

Interfaces. The WisBlock connector exposes UART ports (UART0 and UART1), I2C buses (two sets of signals), an SPI bus, two analog inputs AIN0 and AIN1, general-purpose inputs/outputs, three LEDs and a switch signal SW1, plus a USB port.

Power. The board is powered by USB, a 3.7 V battery or a solar panel. Battery charging runs at 4.5 – 5.5 V and 350 mA. Idle current with the MCU and sensors in sleep mode is 10 µA. A non-rechargeable battery must be unplugged before connecting the USB cable.

Environment. Operating temperature range is –35 to +75 °C, storage temperature range –40 to +80 °C. The product is CE certified.

Typical uses. This kit suits LoRaWAN long-range connectivity tests, development of wireless sensors and prototyping of battery- or solar-powered connected objects, with a UART port and an I2C bus for connecting sensors.

See all specifications

Highlights

  • Frequency band: IN865
  • Capacity: As required
  • Certifications: CE
  • Charging current: 350 mA
  • Charging voltage: 4.5 – 5.5 V
  • Discharge current: At least 500 mA

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote