RAKwireless Meshtastic starter kit built around the RAK19003 base board and RAK4631 core, for off-grid mesh networks in the 900 MHz band. It includes a GNSS module and an acceleration sensor.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Maximum output currentCurrent: 750; Unit: mA
Working current, with LoRa module transmittingCurrent: 130; Unit: µA
Product overview
Base board RAK19003. The RAKwireless WisBlock Meshtastic kit pairs the RAK19003 base board with the RAK4631 core module, based on the Nordic nRF52840 and supplied with the Meshtastic firmware pre-flashed. This version is set for the 900 MHz band (US915, AU915, KR920, AS923) and matches the Meshtastic Tracker role. Modules and sensors — The kit includes the RAK12501 GNSS location module, the RAK1904 acceleration sensor and a 2 dBi rubber antenna, plus an MHF to SMA cable for the LoRa antenna. The base board provides two sensor slots. Interfaces and connectivity — The board exposes I2C1 and I2C2 buses, SPI, UART0 and UART1, USB D+/D– lines and analog inputs AIN0 and AIN1, together with general-purpose I/O pins. Power and charging — The board charges a 3.7 V battery at 4.5 to 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. Environment — Operational range from -35 to +75 °C, storage range from -40 to +80 °C. Typical uses — Location tracking and off-grid messaging over a LoRa mesh, thanks to Meshtastic compatibility and the sensor interfaces of the board. Integration — The WisConnector pins follow the WisBlock Base numbering, allowing other WisBlock modules to be added. CE and FCC certifications.
RAKwireless Meshtastic starter kit built around the RAK19003 base board and RAK4631 core, for off-grid mesh networks in the 900 MHz band. It includes a GNSS module and an acceleration sensor.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
Current: 10; Unit: µA
IOs of WisConnector
Maximum Value: –0.3 to VDD+0.3; Unit: V
Leakage current, without any module on RAK19003
Current: 2; Unit: µA
Maximum output current
Current: 750; Unit: mA
Model
RAK19003
OLED Assembly Method
None
Operational Temperature Range
Minimum: –35 ºC; Typical: +25 ºC; Maximum: +75 ºC
Power supply on the USB port ( VBUS )
Maximum Value: –0.3 to 5.5; Unit: V
Solar panel voltage ( CONN_S )
Maximum Value: –0.3 to 5.5; Unit: V
Standard voltage
3.7 V
Storage Temperature Range
Minimum: –40 ºC; Typical: +25 ºC; Maximum: +80 ºC
Working current, with LoRa module transmitting
Current: 130; Unit: µA
Applications and use cases
Architectures in which 115095 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for 115095 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
115095
WisBlock Meshtastic Starter Kit 900 MHz with Base Board
Charging current
350 mA
Discharge current
At least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details