RAKwireless starter kit for off-grid Meshtastic mesh networking, with pre-flashed RAK4631 core and RAK19003 base board for Client and Router-Repeater roles in the EU868 band.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Maximum output currentCurrent: 750; Unit: mA
Working current, with LoRa module transmittingCurrent: 130; Unit: µA
Product overview
Overview. The RAK19003 is the base board of the RAKwireless WisBlock Meshtastic starter kit, designed for the Client and Router-Repeater roles of the Meshtastic mesh network. The kit includes the RAK4631 core module, based on the Nordic nRF52840, pre-flashed with the Meshtastic firmware. It ships without additional modules, with a 2dBi rubber antenna and an MHF to SMA cable for the LoRa antenna.
Main characteristics. Mini base board, 30 x 35 mm, with two sensor slots. This version is set for 800MHz for EU868/IN865/RU864.
Power and environment. Charges a 3.7 V battery at 4.5 – 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. Operating range -35 to +75 °C, storage range -40 to +80 °C. Certified CE and FCC.
Interfaces and connectivity. I2C, SPI, UART, USB and GPIO connectors, with an ADC analog input. The system allows connecting WisBlock sensors and additional modules.
Typical uses. Off-grid messaging and mesh communication over long distances, with possible relay to the internet through connected nodes. This kit suits setting up a Meshtastic test or deployment network.
Integration. The RAK4631 and RAK19003 board form a ready-to-use assembly, available on quotation from Atlas Electronics.
RAKwireless starter kit for off-grid Meshtastic mesh networking, with pre-flashed RAK4631 core and RAK19003 base board for Client and Router-Repeater roles in the EU868 band.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Maximum output currentCurrent: 750; Unit: mA
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
800MHz for EU868/IN865/RU864
Base Board and Additional Modules
RAK19003 Base Board - no additional modules - 2dBi rubber antenna
Battery voltage ( VBAT )
Maximum Value: –0.3 to 4.3; Unit: V
Capacity
As required
Certifications
CE, FCC
Charging current
350 mA
Charging voltage
4.5 – 5.5 V
Discharge current
At least 500 mA
ESD
Maximum Value: 2000; Unit: V
Extended Temperature Range
Minimum: –40 ºC; Typical: +25 ºC; Maximum: +80 ºC
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
Current: 10; Unit: µA
IOs of WisConnector
Maximum Value: –0.3 to VDD+0.3; Unit: V
Leakage current, without any module on RAK19003
Current: 2; Unit: µA
Maximum output current
Current: 750; Unit: mA
Model
RAK19003
OLED Assembly Method
None
Operational Temperature Range
Minimum: –35 ºC; Typical: +25 ºC; Maximum: +75 ºC
Power supply on the USB port ( VBUS )
Maximum Value: –0.3 to 5.5; Unit: V
Solar panel voltage ( CONN_S )
Maximum Value: –0.3 to 5.5; Unit: V
Standard voltage
3.7 V
Storage Temperature Range
Minimum: –40 ºC; Typical: +25 ºC; Maximum: +80 ºC
Working current, with LoRa module transmitting
Current: 130; Unit: µA
Applications and use cases
Architectures in which 115097 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for 115097 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
115097
WisBlock Meshtastic starter kit with RAK19003 base board
Charging current
350 mA
Discharge current
At least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details