RAK19007 – WisBlock Meshtastic Starter Kit with GNSS and Acceleration Sensor

WisBlock Meshtastic Starter Kit with GNSS and Acceleration Sensor

Microcontroller Development Boards

  • 350 mA
  • At least 500 mA
  • Current: 10; Unit: µA
  • Current: 2; Unit: µA
Manufacturer part number
115099
Manufacturer
RAKwireless
Charging current
350 mA
Discharge current
At least 500 mA

RAKwireless Meshtastic starter kit with RAK19007 base board, RAK12501 GNSS module and RAK1904 acceleration sensor for off-grid mesh messaging in 900MHz bands.

Product overview

Overview. The RAKwireless RAK19007 is a Meshtastic starter kit made of a 30 x 60 mm WisBlock base board, the RAK4631 core based on the nRF52840 pre-flashed with Meshtastic firmware, the RAK12501 GNSS location module and the RAK1904 acceleration sensor, with a 2dBi rubber antenna and an MHF to SMA cable for the LoRa antenna. The off-grid messaging system forwards messages from node to node over a mesh spanning kilometers between nodes, and internet-connected relay nodes can move the conversation online. This kit matches the Meshtastic Tracker role.

Main characteristics. The board provides four sensor slots and one IO slot. It is set for 900MHz for US915/AU915/KR920/AS923 and carries CE and FCC certifications.

Interfaces and connectivity. The pins include UART0 and UART1 ports, two I2C buses, an SPI bus, analog inputs AIN0 and AIN1, general purpose IO pins, a USB port (USB+ and USB–) and LEDs for battery charging and custom use.

Power and environment. The board charges a 3.7 V battery at 4.5 – 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. The operational temperature range is -35 to +75 °C, and the extended range is -40 to +80 °C.

Typical uses. Location tracking and off-grid messaging over a LoRa mesh, with sensors and analog inputs for custom applications.

See all specifications

Highlights

  • Frequency band: 900MHz for US915/AU915/KR920/AS923
  • Capacity: As required
  • Certifications: CE, FCC
  • Charging current: 350 mA
  • Charging voltage: 4.5 – 5.5 V
  • Discharge current: At least 500 mA

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote