RAK4631 – Meshtastic LoRa starter kit with base board and GNSS module

Meshtastic LoRa starter kit with base board and GNSS module

Microcontroller Development Boards

  • 350 mA
  • At least 500 mA
  • Current: 10; Unit: µA
  • Current: 2; Unit: µA
Manufacturer part number
115100
Manufacturer
RAKwireless
Charging current
350 mA
Discharge current
At least 500 mA

RAKwireless WisBlock Meshtastic starter kit for off-grid mesh messaging, combining the RAK4631 core module, RAK19007 base board, OLED display and GNSS module in the 900MHz band.

Product overview

Overview. The RAK4631 is the WisBlock core module from RAKwireless, based on the Nordic nRF52840 and pre-flashed with the Meshtastic firmware. This Meshtastic starter kit is intended for off-grid messaging: radios forward messages from node to node over kilometers, and internet-connected relay nodes can move the conversation online.

Kit contents. The kit includes the RAK19007 Base Board, 30 x 60 mm, with four sensor slots and one IO slot, the RAK1921 OLED display soldered, the RAK12501 GNSS location module, the RAK1904 acceleration sensor and a 2dBi rubber antenna. It matches the Meshtastic combined Client-Tracker role. An MHF to SMA cable for the LoRa antenna is included.

Interfaces and connectivity. The pinout provides UART0 and UART1 ports, I2C1 and I2C2 buses, an SPI bus, analog inputs AIN0 and AIN1, and USB D+ and D– lines. These interfaces allow connection of sensors and additional peripherals.

Power. The board charges a 3.7 V battery at 4.5 – 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. Discharge current is at least 500 mA.

Environment. Operational temperature range from –35 to +75 °C, storage range from –40 to +80 °C. Certified CE and FCC.

Uses. This kit suits deployment of a Meshtastic messaging and position tracking network in the 900MHz band for US915/AU915/KR920/AS923.

See all specifications

Highlights

  • Frequency band: 900MHz for US915/AU915/KR920/AS923
  • Capacity: As required
  • Certifications: CE, FCC
  • Charging current: 350 mA
  • Charging voltage: 4.5 – 5.5 V
  • Discharge current: At least 500 mA

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote