RAK19001 – WisBlock Meshtastic starter kit with base board and OLED display

WisBlock Meshtastic starter kit with base board and OLED display

Microcontroller Development Boards

  • 500 mA
  • At least 500 mA
  • Current: 10; Unit: µA
  • Current: 2; Unit: µA
Manufacturer part number
115115
Manufacturer
RAKwireless
Charging current
500 mA
Discharge current
At least 500 mA

RAKwireless Meshtastic starter kit for off-grid mesh messaging, with RAK19001 base board, RAK1921 OLED display and 2dBi antenna, set for the 800MHz EU868/IN865/RU864 band.

Product overview

Overview. The RAKwireless WisBlock Meshtastic starter kit (model RAK19001) is a microcontroller development board for off-grid Meshtastic messaging. It combines the RAK4631 core module, based on the Nordic nRF52840 and pre-flashed with the Meshtastic firmware, with the RAK19001 base board and a soldered RAK1921 OLED display. A 2dBi rubber antenna and an MHF to SMA cable for the LoRa antenna are included. The kit is set to the Meshtastic Client role.

Main characteristics. The base board provides six sensor slots and two IO slots. It is set for the 800MHz for EU868/IN865/RU864 frequency band. Idle current is 10 µA with the MCU and sensors in sleep mode.

Interfaces and connectivity. The board exposes I2C1 and I2C2 buses, an SPI bus, UART0 and UART1 ports, a USB port, analog inputs AIN0 and AIN1 and IO pins. Connectors A, B, E and F link the board to WisBlock modules.

Power and environment. The board charges a 3.7 V standard battery at 500 mA, with a charging voltage of 4.5 – 5.5 V, and accepts a solar panel. The operational temperature range is -35 to +75 °C and the extended range is -40 to +80 °C. The product is certified CE and FCC.

Typical uses. The kit suits building Meshtastic messaging nodes in Client mode, passing messages between users over a mesh network, and prototyping connected sensors through the I2C, SPI and UART interfaces.

Integration. WisBlock modules plug into the connectors of the base board. Pin assignments are described in the manufacturer's reference documentation.

See all specifications

Highlights

  • Frequency band: 800MHz for EU868/IN865/RU864
  • Base Board and Additional Modules: RAK19001 Base Board - RAK1921 OLED display - 2dBi rubber antenna
  • Capacity: As required
  • Certifications: CE, FCC
  • Charging current: 500 mA
  • Charging voltage: 4.5 – 5.5 V

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote