RAK10718 – Solar-powered IP67 LoRa Meshtastic mesh repeater

Solar-powered IP67 LoRa Meshtastic mesh repeater

Industrial Wireless Mesh Network Nodes

  • Ultra-low-power MCU
  • ≤ 1.5
Manufacturer part number
115147
Manufacturer
RAKwireless
Frequency band
800MHz for EU868/IN865/RU864
Model
RAK10718

Ready-to-use Meshtastic LoRa mesh repeater that extends the range of an outdoor LoRa Mesh network without mains power, thanks to its integrated solar panel and battery.

Product overview

Overview. The RAK10718 from RAKwireless is a ready-to-use LoRa Meshtastic mesh network repeater designed to extend the range of a LoRa Mesh network when direct links between nodes fail. It ships with the Meshtastic firmware pre-flashed on the WisBlock RAK4631 module.

Main characteristics. The repeater is built around the Nordic nRF52840 ultra-low-power MCU and the Semtech SX1262 low-power, high-range LoRa transceiver. The Unify enclosure is made of ABS UL94V-0 flame-retardant material with UV stabiliser, measures 150 mm x 100 mm x 50 mm including the lid, and is IP67 rated.

Interfaces and connectivity. Setup is carried out with the Meshtastic app on a mobile device over Bluetooth Low Energy 5.0. The WisMesh Blade antenna is omnidirectional and vertically polarised, with a VSWR of 1.5 or less for the 9xx MHz variant.

Power. An integrated solar panel and a 3200 mAh Li-Ion rechargeable battery allow autonomous operation in off-grid sites; the battery is certified to IEC 62133-2:2017.

Typical uses. This repeater suits extending a Meshtastic network into remote areas or places without a permanent power supply, and bridging obstacles that block the signal.

Installation. Interchangeable mounting brackets, including wall and pole mounts, simplify deployment. Open-area spacing must be considered, as nodes placed too far apart may not exchange messages.

See all specifications

Highlights

  • Frequency band: 800MHz for EU868/IN865/RU864
  • External dimensions: 150 mm x 100 mm x 50 mm (including lid)
  • Material: ABS UL94V-0 + UV stabiliser (flame-retardant)
  • Model: RAK10718
  • Nordic nRF52840: Ultra-low-power MCU
  • Open areas: If nodes are too far apart, messages may not go through

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote