RAKwireless Meshtastic starter kit built on the WisBlock RAK4631 core and RAK19003 base board, with OLED display, GNSS module and acceleration sensor for 900 MHz LoRa mesh networks.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Maximum output currentCurrent: 750; Unit: mA
Working current, with LoRa module transmittingCurrent: 130; Unit: µA
Product overview
Overview. The RAKwireless WisBlock Meshtastic Starter Kit, model RAK4631, is a starter kit for off-grid LoRa mesh messaging, supplied with the WisBlock RAK4631 core based on the nRF52840 and pre-flashed with the Meshtastic firmware. It is set for the combined Client-Tracker role in the 900MHz for US915/AU915/KR920/AS923 bands.
Main characteristics. The RAK19003 base board, a mini 30 x 35 mm format with two sensor slots, comes with the RAK1921 OLED display supplied loose, the RAK12501 GNSS location module, the RAK1904 acceleration sensor and a 2dBi rubber antenna, plus an MHF to SMA cable for the LoRa antenna.
Interfaces and connectivity. The kit exposes I2C, SPI and UART buses, GPIO pins and a USB interface, allowing sensors and additional modules to be connected to the WisBlock core.
Power and environment. The board charges a 3.7 V battery at 4.5 to 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. It operates from -35 to +75 °C. Current consumption with the LoRa module transmitting is 130 µA.
Typical uses. The kit suits off-grid messaging nodes and location trackers, where messages are relayed node to node across the mesh, and internet-connected nodes can move conversations online.
Integration. The kit is certified CE and FCC. It is available on quotation from Atlas Electronics.
RAKwireless Meshtastic starter kit built on the WisBlock RAK4631 core and RAK19003 base board, with OLED display, GNSS module and acceleration sensor for 900 MHz LoRa mesh networks.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
Current: 10; Unit: µA
IOs of WisConnector
Maximum Value: –0.3 to VDD+0.3; Unit: V
Leakage current, without any module on RAK19003
Current: 2; Unit: µA
Maximum output current
Current: 750; Unit: mA
Model
RAK19003
OLED Assembly Method
OLED Loose
Operational Temperature Range
Minimum: –35 ºC; Typical: +25 ºC; Maximum: +75 ºC
Power supply on the USB port ( VBUS )
Maximum Value: –0.3 to 5.5; Unit: V
Solar panel voltage ( CONN_S )
Maximum Value: –0.3 to 5.5; Unit: V
Standard voltage
3.7 V
Storage Temperature Range
Minimum: –40 ºC; Typical: +25 ºC; Maximum: +80 ºC
Working current, with LoRa module transmitting
Current: 130; Unit: µA
Applications and use cases
Architectures in which 116097 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for 116097 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
116097
WisBlock Meshtastic LoRa 900MHz Starter Kit with OLED and GNSS
Charging current
350 mA
Discharge current
At least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details