RAK19001 – WisBlock Meshtastic Starter Kit 900 MHz with OLED Display

WisBlock Meshtastic Starter Kit 900 MHz with OLED Display

Microcontroller Development Boards

  • 500 mA
  • At least 500 mA
  • Current: 10; Unit: µA
  • Current: 2; Unit: µA
Manufacturer part number
116100
Manufacturer
RAKwireless
Charging current
500 mA
Discharge current
At least 500 mA

RAKwireless Meshtastic starter kit built on the RAK19001 base board, with RAK4631 core module, RAK1921 OLED display and 2dBi antenna, for off-grid mesh messaging in the 900MHz band.

Product overview

RAKwireless RAK19001. The RAK19001 WisBlock Meshtastic Starter Kit is a development kit for Meshtastic off-grid mesh messaging. It includes the RAK4631 WisBlock Core module, based on the Nordic nRF52840 and pre-flashed with the Meshtastic firmware, together with the RAK19001 Base Board, the RAK1921 OLED display supplied loose and a 2dBi rubber antenna. It is set for the Meshtastic Client role and for 900MHz for US915/AU915/KR920/AS923.

Main characteristics. The RAK19001 base board provides six sensor slots and two IO slots. It charges a 3.7 V battery at 4.5 – 5.5 V with a charging current of 500 mA, accepts a solar panel and draws 10 µA idle with the MCU and sensors in sleep mode. The kit includes an MHF to SMA cable for the LoRa antenna.

Interfaces and connectivity. The board exposes the I2C1 and I2C2 buses, an SPI bus, the UART0 and UART1 ports, a USB connection and the analog inputs AIN0 and AIN1, along with IO, LED and reset pins through WisConnector connectors A to F.

Power and environment. The permitted battery voltage ranges from –0.3 to 4.3 V and the USB supply voltage from –0.3 to 5.5 V. The operational temperature range is –35 to +75 °C, and the extended range is –40 to +80 °C for storage. The product is certified CE and FCC.

Typical uses. This kit suits the deployment of LoRa mesh networks for off-grid messaging, with relay nodes connected to the Internet to carry conversations online, and sensor prototyping on the WisBlock slots.

See all specifications

Highlights

  • Frequency band: 900MHz for US915/AU915/KR920/AS923
  • Base Board and Additional Modules: RAK19001 Base Board - RAK1921 OLED display - 2dBi rubber antenna
  • Capacity: As required
  • Certifications: CE, FCC
  • Charging current: 500 mA
  • Charging voltage: 4.5 – 5.5 V

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote