RAK11310 – Meshtastic LoRa Starter Kit RP2040 with Base Board

Meshtastic LoRa Starter Kit RP2040 with Base Board

Microcontroller Development Boards

  • LoRaWAN
Manufacturer part number
119039
Manufacturer
RAKwireless

RAKwireless starter kit for Meshtastic LoRa mesh networks, with RAK11310 core module based on the Raspberry Pi RP2040 and RAK19007 base board for the 900 MHz band.

Product overview

Overview. The RAK11310 starter kit from RAKwireless is a LoRa development board for Meshtastic mesh networks, with no cellular or internet connection needed. The RAK11310 core module, powered by the Raspberry Pi RP2040 and pre-flashed with Meshtastic firmware, supports the Client, Tracker and Router Repeater roles.

Main characteristics. This version combines the RAK19007 base board, 30 x 60 mm, with four sensor slots and one IO slot, without additional modules and with a 2dBi rubber antenna. It matches the Meshtastic Basic and Router-Repeater roles and is set for 900MHz for US915/AU915/KR920/AS923.

Interfaces and connectivity. The WisBlock connector exposes the I2C1 and I2C2 buses, two UARTs (UART0 and UART1), an SPI bus, analog inputs AIN0 and AIN1, IO pins and a USB port.

Power and environment. The board charges a 3.7 V battery at 4.5 – 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. It operates from -35 to +75 °C and is compatible with Solar IP67 enclosures from the Unify collection.

Typical uses. Off-grid messaging, position tracking and message relaying between nodes in areas without cellular coverage.

Integration. The UART, I2C and SPI pins allow sensors or PLCs to be connected through the WisBlock connector.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote