RAK11310 – RP2040 LoRa mesh starter kit with GNSS and accelerometer

RP2040 LoRa mesh starter kit with GNSS and accelerometer

Microcontroller Development Boards

  • 350 mA
  • At least 500 mA
  • Current: 10; Unit: µA
  • Current: 2; Unit: µA
Manufacturer part number
119042
Manufacturer
RAKwireless
Charging current
350 mA
Discharge current
At least 500 mA

RAKwireless starter kit for Meshtastic LoRa mesh networks, with RAK11310 core module based on the RP2040 microcontroller, RAK19007 base board, RAK12501 GNSS module and RAK1904 acceleration sensor, for a Tracker role.

Product overview

RAKwireless RAK11310 starter kit. The WisMesh RP2040 Starter Kit from RAKwireless, referenced RAK11310, is a microcontroller development board for off-grid Meshtastic LoRa mesh networks, with no cellular or internet connection required. The RAK11310 core module is powered by a Raspberry Pi RP2040 microcontroller and is pre-flashed with Meshtastic firmware.

Main features. The kit combines the RAK19007 base board, 30 x 60 mm, with four sensor slots and one IO slot, the RAK12501 GNSS location module and the RAK1904 acceleration sensor, plus a 2dBi rubber antenna. It matches the Meshtastic Tracker role and supports the Client, Tracker and Router Repeater roles.

Connectivity and interfaces. The base board provides UART0 and UART1 signals, I2C1 and I2C2 buses, an SPI bus, analog inputs AIN0 and AIN1, IO pins and a USB interface. The RAK1921 OLED display is supported in the Client and Combined Client-Tracker roles.

Power and environment. The board charges a 3.7 V battery at 4.5 – 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. It operates from -35 to +75 °C. This version is set for 900MHz for US915/AU915/KR920/AS923.

Typical uses. The kit suits outdoor position tracking and off-grid communication, and it is compatible with Solar IP67 enclosures from the Unify collection. Integration — The IO pins and buses allow WisBlock modules and sensors to be added on the base board.

See all specifications

Highlights

  • Frequency band: 900MHz for US915/AU915/KR920/AS923
  • Capacity: As required
  • Charging current: 350 mA
  • Charging voltage: 4.5 – 5.5 V
  • Client Role: RAK1921 OLED Display
  • Combined Client-Tracker Role: RAK1921 OLED Display

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote