WisMesh RP2040 Starter Kit – LoRa Meshtastic mesh starter kit with GNSS and OLED module

LoRa Meshtastic mesh starter kit with GNSS and OLED module

Microcontroller Development Boards

  • 350 mA
  • At least 500 mA
  • Current: 10; Unit: µA
  • Current: 2; Unit: µA
Manufacturer part number
119044
Manufacturer
RAKwireless
Charging current
350 mA
Discharge current
At least 500 mA

RAKwireless WisMesh RP2040 starter kit for off-grid LoRa Meshtastic mesh networks, with GNSS, accelerometer and OLED display modules, in the 900 MHz band.

Product overview

Overview. The RAKwireless WisMesh RP2040 Starter Kit is a development starter kit for LoRa Meshtastic mesh networks, built around the RAK11310 WisBlock Core module powered by the Raspberry Pi RP2040 and pre-flashed with Meshtastic firmware. Messages are forwarded from node to node with no cellular or internet connection.

Main characteristics. This version combines the 30 x 60 mm RAK19007 Base Board, with four sensor slots and one IO slot, with the RAK12501 GNSS location module, the RAK1904 acceleration sensor and the RAK1921 OLED display supplied loose. A 2dBi rubber antenna is included. The kit matches the Meshtastic combined Client-Tracker role and supports the Client, Tracker and Router Repeater roles.

Interfaces and connectivity. The base board exposes UART0 and UART1 signals, I2C1 and I2C2 buses, an SPI bus, analog inputs AIN0 and AIN1, general purpose IO pins and a USB connection. The frequency band is 900MHz for US915/AU915/KR920/AS923.

Power and environment. The board charges a 3.7 V battery at 4.5 – 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. The operating temperature range is -35 to +75 °C.

Typical uses and integration. Suited to off-grid messaging and tracking mesh networks, the kit is compatible with Solar IP67 enclosures from the Unify collection.

See all specifications

Highlights

  • Frequency band: 900MHz for US915/AU915/KR920/AS923
  • Capacity: As required
  • Charging current: 350 mA
  • Charging voltage: 4.5 – 5.5 V
  • Client Role: RAK1921 OLED Display
  • Combined Client-Tracker Role: RAK1921 OLED Display

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote