RAKwireless WisMesh RP2040 starter kit for off-grid Meshtastic LoRa mesh messaging without cellular or internet connection, in the 900 MHz version for US915, AU915, KR920 and AS923.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Maximum output currentCurrent: 750; Unit: mA
Working current, with LoRa module transmittingCurrent: 130; Unit: µA
Product overview
Overview. The RAKwireless WisMesh RP2040 Starter Kit, reference RAK11310, is a LoRa development kit for Meshtastic mesh networks, built around the RAK11310 core module and the RAK19003 base board in the 30 x 35 mm Mini Base Board format.
Main characteristics. The RAK11310 module is powered by the Raspberry Pi RP2040 and pre-flashed with Meshtastic firmware. This version is set for the Client role and combines a soldered RAK1921 OLED display with a 2dBi rubber antenna. It is configured for the 900MHz for US915, AU915, KR920 and AS923 band.
Interfaces and connectivity. The base board exposes I2C1, I2C2, SPI, UART0 and UART1 signals, a USB D+/D– connection and analog inputs AIN0 and AIN1, together with connectors C and D for WisBlock modules. The LEDs LED1, LED2 and LED3 and the IO1 to IO7 general purpose pins are available.
Power and environment. The base board charges a 3.7 V battery at 4.5 – 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. The operational temperature range is -35 ºC to +75 ºC and the storage range -40 ºC to +80 ºC.
Typical uses. The kit supports an off-grid messaging network in which messages are forwarded from node to node, with no cellular or internet connection. The Tracker role is provided by another module of the range rather than by this Client configuration.
Integration. The kit is compatible with Solar IP67 enclosures from the Unify collection. Available on quotation from Atlas Electronics.
RAKwireless WisMesh RP2040 starter kit for off-grid Meshtastic LoRa mesh messaging without cellular or internet connection, in the 900 MHz version for US915, AU915, KR920 and AS923.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Maximum output currentCurrent: 750; Unit: mA
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
900MHz for US915/AU915/KR920/AS923
Base Board and Additional Modules
RAK19003 Base Board-RAK1921 OLED display-2dBi rubber antenna
Battery voltage ( VBAT )
Maximum Value: –0.3 to 4.3; Unit: V
Capacity
As required
Charging current
350 mA
Charging voltage
4.5 – 5.5 V
Client Role
RAK1921 OLED Display
Combined Client-Tracker Role
RAK1921 OLED Display
Discharge current
At least 500 mA
ESD
Maximum Value: 2000; Unit: V
Extended Temperature Range
Minimum: –40 ºC; Typical: +25 ºC; Maximum: +80 ºC
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
Current: 10; Unit: µA
IOs of WisConnector
Maximum Value: –0.3 to VDD+0.3; Unit: V
Leakage current, without any module on RAK19003
Current: 2; Unit: µA
Maximum output current
Current: 750; Unit: mA
Model
RAK19003
OLED Assembly Method
OLED Soldered
Operational Temperature Range
Minimum: –35 ºC; Typical: +25 ºC; Maximum: +75 ºC
Power supply on the USB port ( VBUS )
Maximum Value: –0.3 to 5.5; Unit: V
Solar panel voltage ( CONN_S )
Maximum Value: –0.3 to 5.5; Unit: V
Standard voltage
3.7 V
Storage Temperature Range
Minimum: –40 ºC; Typical: +25 ºC; Maximum: +80 ºC
Tracker Role
RAK12501 GNSS Location Module
Working current, with LoRa module transmitting
Current: 130; Unit: µA
Applications and use cases
Architectures in which 119047 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for 119047 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
119047
900 MHz LoRa Meshtastic Mesh Starter Kit
Charging current
350 mA
Discharge current
At least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details